-
Anonymous users2024-01-24Adjust the rope that pulls the valve inside the tank short, and pull it from the outside to follow the inside.
-
Anonymous users2024-01-23The tank is broken and it is recommended to replace it.
-
Anonymous users2024-01-22Install the water tank higher, and if it can't be flushed, the water pressure is not enough.
-
Anonymous users2024-01-21Turn the water level higher and the effective length of the drawstring shorter.
-
Anonymous users2024-01-20It is recommended to find a master who repairs the toilet bowl to take a look.
Open the water tank, pick it up again, and open it and you can see it.
It is the rubber plug used, the water tank is to use the principle of water drop, so that the water is washed down from the water pipe from a height, from potential energy to kinetic energy, the dirt is washed away, the pull rope of the water tank is usually on the side of the water tank, connected to the lever of the starting rubber stopper.
Personally, I think that small water tanks are known as water-saving toilets. Water saving should be based on the premise that the toilet can be flushed, and if it can't be flushed at one time, it can't talk about saving water. Fortunately, most of the toilet tanks can adjust the water level, and the water level should be carefully adjusted according to the actual situation to achieve the purpose of saving water. >>>More
You first make sure that there is no scotch tape (some manufacturers' trademarks) around the toilet tank lid, and you can use a blade to open it. The button of a sanitary ware is rotated and fixed on the sanitary ware in the water tank, and the water tank cover can only be opened after the button is unscrewed.
There are front rows and back rows, which are different, as long as they are used in front and rear.