The toilet at home is old and blocked, and the impulse is very small, what s going on

The toilet flush is not enough, and the toilet is not flushed clean, which may be a problem with the toilet shifter, that is, the water outlet of the toilet is not directly facing the sewer pipe, and there is a curve in the middle, which is connected when the toilet is installed. It is also possible that the toilet is blocked, after the toilet is blocked, when flushing, the water level will slowly rise, and the toilet will not be flushed. It is also possible that when you use it, you don't have a good reason to do it, and you don't let go when you press the flush button, which will also cause the impulse to be insufficient, and you must press it for 2-3 seconds, so that you can completely open the flush valve, and the flushing effect can be the best.

1.There are usually two types of toilet (toilet) blockages:

One is the blockage of soft substances (usually feces, paper towels, rags, etc.), and the other is the blockage of hard objects (toothbrushes, plastic bottle caps, small combs, small toys, pens, etc.). Of course, there may be other reasons for the blockage, problems with the pipes themselves, etc. Here we are talking about two common reasons.

Common methods: 1. Dun cloth method: use your mopping dun cloth.

First put the cloth at the mouth of the toilet, and then put water to ensure that the water submerges the cloth. Then press the cloth hard, stuff it into the toilet mouth as much as possible, and finally lift the cloth as fast as possible, repeat this action, the things in the toilet will be sucked out, and the pipe can be unblocked.

2. Find a longer section of plastic water pipe, connect the tap water at one end, plug the toilet mouth into the toilet mouth at the other end, and then block the toilet mouth with rags and other things, and then turn on the tap water, which will use the water pressure to dredge the pipe.

It may be a problem with the toilet shifter, that is, the outlet of the toilet is not directly facing the sewer pipe, and there is a curve in the middle, which is connected when the toilet is installed, if this is the case, you need to disassemble the toilet and reinstall it, and the problem will be solved.

It is possible that the inlet valve and drain valve are not adjusted properly, and the flush volume of the inlet valve and drain valve is increased (the water tank needs to be removed for adjustment), and the impulse will naturally become stronger.

It is recommended that when you press the flush button, press it for 2 or 3 seconds, because you can fully open the flush valve to flush the effect to achieve the best.

It is possible that the inlet valve and drain valve are not adjusted properly, and the flush volume of the inlet valve and drain valve is increased (the water tank needs to be removed for adjustment), and the impulse will naturally become stronger.

If you don't buy it in a specialty store or a regular online building materials city, you may be buying a counterfeit product, and the impulse of the counterfeit product is definitely not as big as the genuine toilet, because it can only imitate the appearance of others, and cannot imitate the core technology of others.

Our likes are to click on the top right corner to end the service, and then five stars will appear, and then light them up.