The flush handle of the flush toilet is broken, how to solve it

Updated on Toilet 2024-07-31
1 answers
  1. Anonymous users2024-01-24

    Go to the decoration materials market, buy sanitary ware, see if there is a similar model with your water tank, just buy an accessory, if you do not import sanitary ware, it is generally about 20-30 yuan. It should be easy to pretend, and you can do it yourself.

Related questions
2 answers2024-07-31

It's not expensive, get a new one.

2 answers2024-07-31

Go to the building materials market to buy a set of 01 float old-fashioned sanitary ware, about fifteen. >>>More

2 answers2024-07-31

The principle of the flush toilet is mainly the siphon principle, and the schematic diagram of the flush toilet is also based on the siphon principle. The "pumping" of the flush toilet refers to the S-shaped bend under the toilet, and when the water surface in the toilet exceeds the high point of the S-bend, the siphon phenomenon is formed, which can pump the water and dirt of the toilet together. Until only a small amount of water remains, the siphon destroys, leaving a small amount of water, forming a water seal. >>>More

3 answers2024-07-31

Generally, the phenomenon that the water has been flowing non-stop after flushing is the rubber plug cover of the outlet or the mouth has scale, you open the water tank cover, and then find the outlet that is the outlet where the water from the water tank flows to the toilet, and check the rubber cover on it to see if there is scale or wear. Generally, it is because of the poor sealing that it causes long-term running water.

4 answers2024-07-31

I believe everyone has encountered a blocked toilet, and it can also be said to be a more common thing in lifeNot only does it directly affect normal life, but it puts us in an awkward position? In fact, after the toilet is blocked, you may not immediately turn to a professional toilet company, you can try it yourself, so what are the methods of flushing the toilet? >>>More