There are two lights in one room, one single open control for the entrance door, and one double open

Updated on Enter the door 2024-07-29

1 answers

Anonymous users2024-01-24

You're talking about a switch controlling a light.

Just connect two sets of switches in parallel.

Related questions

Bathroom There is only one light, one single control. Newly bought thread on a lighted exhaust fan

3 answers2024-07-29

Find four single-core wires and tie them firmly with the existing light wires, use this single-core wire to bring out the four wires, replace the switch with a four-link switch, and connect them one by one. Generally, the threading pipe can run four lines.

A switch controls two lights, one controls the living room, and the other controls the bedroom

1 answers2024-07-29

You need to use a double-open and double-control switch, which can turn on or off the living room light in the bedroom; In the living room you can turn off and on the bedroom lights. Right?

Can one switch control four lights in the kitchen be changed to one control two?

2 answers2024-07-29

One switch controls four lights, and if you want to change to a total of two, you may need to rewiring them.

Originally, there was a single-turn switch in the living room to control the main light in the livin

3 answers2024-07-29

Generally, there is no zero line in the switch, only two wires can be seen from your switch, a live wire, a control line, so that you need a zero line to connect the corridor light to a single control, this zero line needs to be taken from the living room lamp to the switch, or taken out from the nearest socket, the connection method is as shown in the figure:

The toilet socket is controlled by a single switch to control a fire, and the original main switch i

2 answers2024-07-29

I don't know if it's a leakage trip or an overload trip. It may be a failure or a small leakage. Another is that there is a leakage fault in the electrical appliance.