What should I do if the water pressure in my bathroom is low?

Find out the reason first, and most of them add a water pump.

If you have the same water pressure in the kitchen and bathroom. There's nothing to do. The only way to do this is to add a water pump.

If not, the first problem is that the pipes to the bathroom are too thin. Second, the pipeline is blocked. The third is that the PPR pipe is dissolved at a high temperature during construction, which makes the inner diameter of the pipe smaller.

1. Whether the size of the washbasin inlet pipe is the same size as the size of the bath and flush toilet, and whether it is the same pipe.

Second, there are two hoses under the washbasin, which is a triangle valve, and whether the valve switch is opened to the maximum.

3. You can unscrew the connected hose to see if the inlet pressure and flow rate are large.

Fourth, if the connecting hose is unscrewed, the amount of water is small, it may be a pipe problem or a switch problem somewhere in the pipeline.

5. If the connecting hose is unscrewed, the amount of water is large, it may be that the water flow is blocked after the hose is folded, or the hose is connected to the galvanized pipe or plastic pipe.

There is a rubber gasket (to prevent the joint from leaking), and the middle hole of the rubber gasket is too small or the gasket is biased will affect the flow rate.

Sixth, it is also possible that the hose is blocked.

Take a look at the water pressure when the switch under the washbasin is on, (unscrew the hose), the problem is mostly with the switch head on the washbasin.

The inlet pipe is small.

It is recommended to enlarge it, or fake the water tank.