The locktongue of the toilet door lock is rusty, and it can t be opened before the handle can be dis

It should be that the handle is not installed properly, first loosen the screws of the cover and try to install the handle if you can.

Then use a flat chisel to directly hit the connecting rod, if the deadbolt is dragged out, in the case of the connecting rod can be seen in the gap of the door, then this gap will increase in this case, you first need to judge what is the problem, if it is really a problem with the deadbolt, you can judge it in combination with the situation after you usually close the door, so as not to pry the appearance of the door yourself, if the deadbolt runs over, according to the conventional judgment, you can open the door after breaking, and there is a simple way, you can first use the airbag to support the gap of the door, If there is no problem with the deadbolt, there is no gap or only a little gap when the handle is pulled after closing the door, and you need to find someone from the lock picking company to solve it.

The tongue lock of the anti-theft door is broken, and it can't be opened inside and out, so it has to be repaired.

The failure of the deadbolt to expand and contract is caused by the drying of the original lubricating oil and the fluffing of some contact parts after long-term use. Because people frequently touch the deadbolt when entering and exiting the door, it is not advisable to rub oil and lead powder on the deadbolt, which is easy to contaminate clothes. The best way is to wipe the deadbolt and related parts with a soap tip, the deadbolt that has been wiped with soap is very flexible, and the soap on the deadbolt is easy to clean even if it rubs against the clothes.

What kind of lock are you talking about, like an ordinary three-ring lock, as long as the aluminum block spring on the side of the lock is removed (you can use nails and hammers), and then the small steel rod under the front sign can be removed to remove the lock cylinder. If it is the kind of hidden lock, then just disassemble the lock and remove the iron ring on the outside of the lock cylinder. You can also try to use a bank card that costs money, insert it through the crack of the door into the lock center, and insert it hard, it is easy to open. >>>More