-
Anonymous users2024-01-24Communicator principle. You need to take the toilet apart and break the pipes inside the toilet higher, but this is cumbersome and dirty.
It is recommended that you change the toilet. Also, are you sure it's not blocked? If it's blocked, it's lower. It would be nice to unblock it. Now all the toilet feng shui on the market is normal.
The water level of the drain is the water storage, which generally increases in addition to blockage, and the water level is different for different toilet designs. Generally, the water level is in the water tank, and the float of the tank will be lowered to reduce the amount of water, and the water volume will be increased if it is raised.
It may be that after the glaze is damaged, the steel wool ball rubs against the ceramic, resulting in an iron color. Wiping the toilet bowl with a steel wool ball will damage the glaze, it is easy to stick, and it is not easy to clean. FYI.
The hydrosphere print is a problem with the water, not the toilet. The toilet bowl should be cleaned frequently, and if it is not cleaned for a long time, there will be limescale marks. I hope my answer can help you.
1. The next step is to measure the size of the toilet, first measure the distance from the front end of the toilet to the center of the sewer nozzle, and then use a ruler to measure the distance between the two ends of the toilet. >>>More
In the bottom right corner of your picture, there's a screw with a cross concave on it, and you're going to see a lot of spirals. Pull out the bottom of this compass rod upwards, and the water in the tank will be less, and push the screw down, and there will be more water in the tank. >>>More