-
The water level of the drain is the water storage, which generally increases in addition to blockage, and the water level is different for different toilet designs. Generally, the water level is in the water tank, and the float of the tank will be lowered to reduce the amount of water, and the water volume will be increased if it is raised.
First of all, we lift the lid of the toilet, pay attention to be sure to hold it steady, handle it gently, and do not bump it. >>>More
Abstract: If the seal is scraped, seal it and hit the sealant. >>>More
There are two places in it that can be adjusted, there is one inlet rod, and there is also one flush valve, I don't know what kind of accessories your toilet is equipped with, I don't know the specific, but the toilet accessories are basically the same adjustable,
Open the toilet water phase cover, which is similar to the pole of the fast son, and there is a cross on it, and you can adjust the water level of the water phase by turning it left and right with a cross tape knife.
The model of the water valve is different, the way of adjustment is also different, the float has a steel wire rod below the float and there is a metal shrapnel on the top, and the metal sheet can be adjusted by moving the metal piece up and down by hand to the pincher together, and there is an obvious screw rod at the top of the water valve. Adjust the height of the pontoon by adjusting the screw rod (forward rotation, reverse rotation), try it