-
Anonymous users2024-01-24Just turn off the main water inlet valve in your home, and each house has a main water valve, which is on the main pipe of your home.
-
Anonymous users2024-01-23I'll teach you, aluminum element, ignite it to get alumina, if your water pipe is made of iron, that's great, smear alumina on the iron pipe, burn it at high temperature, and weld it.
No, it can be filled with low water pressure, but it is slow.
1. Close the inlet angle valve; Take out the water-stop cover of the falling water part and check whether it is deformed, aged or has foreign objects adhered; Wash or replace the water-stop cap. >>>More
Some water tank covers are threaded, and the toilet lid can be removed by pinching the button frame by hand and rotating it counterclockwise, and the ejector rod can be adjusted (lengthened) after removal
It is also possible that it is not a blockage, and the opening of the water inlet is too small.
Open the lid of the water tank and move the water pontoon to see if it is stuck, and see if the angle valve below is open, it is okay, that is, there is a filter screen blocked in the water supply pipe between the angle valve and the water tank, close the angle valve and open it to clean it, and if you can't repair it, you can find the property department to repair it