What type of tiles should be used in places with large water consumption, such as bathrooms and kitc

I remember when I was decorating my house the year before last, the decorator told us what kind of tile should be the best. Like bathrooms and kitchens, where water consumption is relatively large, tiles are generally non-slip, waterproof, and leak-proof tiles.

Anti-slip means that the surface friction of the tile should be strong. The brick surface should not be too smooth, so if there is water, it will be easy to fall. Falling on the tiles is painful enough, and you can break your leg in a serious way.

It is best to choose a rough surface, like a tile with uneven patterns or carvings, to increase strength. Increase the friction between your feet and the ground, so that it is not easy to fall.

Waterproofing means that the water absorption rate of the tile should be low. When it comes into contact with water, it can quickly absorb and evaporate, and quickly dry up. Generally, the water absorption rate of better quality tiles is low, go to the store to buy tiles, to see what the water absorption rate is.

Because kitchens and bathrooms have a lot of water, if the tiles don't absorb water quickly, the water will remain on the ground. Not only is it easy to fall, but it is also easy to stain the ground, which is difficult to clean.

Anti-leakage is a requirement for the shape and installation of tiles. The kitchen and bathroom have a lot of water, so they are also prone to leaks. If it leaks, it will be troublesome.

The residents downstairs of your house are going to quarrel with you. And this one is not easy to fix. If you want to prevent leakage, choose some tiles with a more regular shape, which are easy to install.

The best one can be installed seamlessly, and if there are no gaps, it will be difficult to leak. This is not only a high requirement for ceramic tiles, but also for installation technology.

After solving these problems, give a little more advice. It is not enough for the tiles in the kitchen and bathroom to be non-slip, waterproof and leak-proof. Both of these places are easy to get dirty, so it's best to choose tiles that are resistant to dirt or easy to clean.

The tiles we usually use are the kind that the more water they have, the more slippery they are, but they must not be used here, otherwise it would be purely looking for death if they are ugly. Recently, when I browsed the website, I found a newly produced tile, the application of special materials and special texture, so that this tile has a very good anti-slip effect, and its more powerful place is that if there is water on the tile, the anti-slip effect will be better.

However, before this, there was no such tile, and there was no tile made of this material, the most commonly used one is the tile with texture made of ordinary materials, which is also very practical compared to those without texture, and most of the family's kitchens and bathrooms also use this kind of tile, because no one wants to be suddenly fallen, light or fractured, heavy is a life.

I think that no matter what kind of tile is chosen, those are not necessary, the most important thing is that we have to have a sense of safety protection and self-protection, in the case of water, we should move slowly, if it moves too fast, no matter how good the anti-slip tile is useless. Tiles can only be used to alleviate the situation, and it is unlikely to be avoided.

Like the various tiles on the market now, many tiles have different water absorption. According to my own personal experience, non-absorbent tiles should be used in places with a lot of water consumption, such as bathrooms and kitchens.

The tiles in our bathrooms and kitchens are not the same. The tiles in the bathroom are waterproof tiles, there is no problem in the first two years, and the tiles on the ground are okay after a long time!

The tiles on the wall began to seep water, and now the outer wall of the bathroom has begun to slowly fall off, all of which are caused by long-term water seepage, which especially affects the overall appearance of the home.

Therefore, in a place like the bathroom, because everyone usually has to take a bath, it is easy to splash water in various places in the bathroom. If the waterproofing of the bathroom is not done well.

No matter how good the tiles are, they will also seep water, because when the tiles are pasted, there are still gaps next to them. In order that the bathroom will not seep water, be sure to do a good job of waterproofing in advance, and then paste tiles that do not seep water.

Because there is water in the bathroom for a long time, in order to better keep the bathroom dry. Use tiles that don't need to be soaked in water, just fit them directly. Although this kind of tile is a little more expensive, it does not seep water.

I think this kind of tile in my house is very good, and the water does not adhere to the tile. It is particularly easy to dry, as soon as a person takes a shower, the water on the tiles will automatically flow out, and it will dry out after a short while.

For the tiles in the kitchen, I think the performance should be roughly the same as the tiles in the bathroom. And it's best to use something non-slip, so that it is not easy to slip even if there is oil and water on the ground.

Why! Because the kitchen and the bathroom are different, the bathroom also has a special floor drain through the sewer pipe, but the kitchen does not, once there is no place for water and oil to leak, it is especially agreed to cause a safety accident.

To sum up, you should have an idea of the performance of the tiles that should be used in the bathroom and kitchen. The bathroom is dry and waterproof, and the kitchen is dry and non-slip. Hope it helps!