How to install the ceiling light strip in the living room, and what points should be paid attention

Strip light most bai

It is hidden to install some hanging ceilings, LED light strips are still a developing version of the emerging product compared to the traditional lighting dao, so many consumers do not know much about how to install LED light strips. 1. First determine the length of the installation, and then take the integer to intercept, because this kind of light strip is a unit of 1 meter, only cut off from the cut, it will not affect the circuit, if it is cut at will, it will cause the unit to not light up. Examples:

If you need a meter length, the light strip should be cut 9 meters 2, link plug The LED itself is a diode, DC driven, so there is a positive and negative pole, if the positive and negative poles are reversed, it is in an insulated state, and the light strip is not lit. If the connecting plug does not light up when the power is on, you only need to disassemble the other end of the connecting light strip. 3. The placement of the light strip The light strip is packaged in a tray, and the newly disassembled light strip will be twisted, so you can sort it out first and then put it into the light trough.

1. Indoor installation:

When LED strips are used for interior decoration, the installation is very simple because they do not have to withstand the wind and rain. Taking the LED strip produced by Guanghong Electronics as an example, the back of each LED strip is pasted with self-adhesive 3M double-sided tape, and the sticker on the surface of the 3M double-sided tape can be directly removed during installation, and then the light strip is fixed in the place where it needs to be installed, and it is good to press it flat by hand. As for some places that need to be cornered or are long, what should I do?

Very simply, LED strip light is a circuit structure composed of 3 LEDs in series and parallel, and each 3 LEDs can be cut and used separately.

2. Power connection method:

The general voltage of LED strip light is DC 12V, so it needs to use a switching power supply for power supply, and the size of the power supply is determined according to the power of the LED strip light and the connection length. If you don't want each LED strip to be controlled by a power supply, you can buy a switching power supply with relatively large power as the total power supply, and then connect all the LED strip input power supplies in parallel (if the wire size is not enough, it can be extended), and the power supply is unified by the total switching power supply. The advantage of this is that it can be centrally controlled, and the inconvenient place is that the lighting effect and switch control of a single LED strip cannot be realized.

3. Controller connection mode:

LED marquee strip and RGB full-color strip need to use a controller to achieve the effect of change, and the control distance of each controller is different, generally speaking, the control distance of the simple controller is 10 to 15 meters, the control distance of the remote control controller is 15 to 20 meters, and the longest distance can be controlled to 30 meters. If the LED strip is connected over a long distance and the controller cannot control the grow strip, a power amplifier is required for tapping.

4. Pay attention to the connection distance of the LED strip light:

Generally speaking, the 3528 series LED strip has a maximum connection distance of 20 meters, and the 5050 series LED strip has a maximum connection distance of 15 meters. If this connection distance is exceeded, the LED strip light is easy to heat up, and the service life of the LED strip will be affected during use. Therefore, when installing, it must be installed in accordance with the manufacturer's requirements, and do not let the LED strip run overloaded.

Most of the light strips are hidden and installed in some ceilings, LED light strips are still an emerging product in development compared to traditional lighting, so many consumers do not know much about how to install LED light strips. 1. First determine the length of the installation, and then take the integer to intercept, because this kind of light strip is a unit of 1 meter, only cut off from the cut, it will not affect the circuit, if it is cut at will, it will cause the unit to not light up. Examples:

If you need a meter length, the light strip should be cut 9 meters 2, link plug The LED itself is a diode, DC driven, so there is a positive and negative pole, if the positive and negative poles are reversed, it is in an insulated state, and the light strip is not lit. If the connecting plug does not light up when the power is on, you only need to disassemble the other end of the connecting light strip. 3. The placement of the light strip The light strip is packaged in a tray, and the newly disassembled light strip will be twisted, so you can sort it out first and then put it into the light trough.

There are still many places to consider in the decoration of the living room, the decoration style should be taken into account when decorating, and it should be noted that it is practical, how to install the ceiling light strip in the living room?

Plan 1: Make a ceiling around the living room, and do not make a ceiling in the middle. These ceilings can be molded from wood plywood and designed in a variety of shapes, with spotlights or downlights, and a novel ceiling light in the middle of the non-suspended ceiling.

This will visually increase the height of the space, which is more suitable for living rooms with large spaces.

Scheme 2: Make the ceiling around the living room thick, and the middle part thin, so as to form two obvious levels. This practice should pay special attention to the design of the surrounding ceiling, and you can also add your own ideas and preferences in the design process, so that the ceiling can be designed in different styles with a modern or traditional atmosphere.

Plan 3: Use plaster around the ceiling to make shapes. Gypsum can be made into a variety of geometric patterns, or carved out of various patterns of flowers, birds, insects and fish, with the characteristics of cheap and simple construction.

Therefore, it is also a good way to use the ceiling in the living room, as long as its decorative effect is coordinated with the decoration style of the room, it can achieve a good overall effect.

Option 4: If the living room is highly spaced, then there is a lot of leeway when choosing a suspended ceiling. You can choose a variety of forms such as fiberglass ceilings, plywood modeling ceilings, gypsum sound-absorbing ceilings, etc. These ceilings are quite aesthetically pleasing.