Is the solid wood floor easy to decay and be eaten by insects?

This worry is unnecessary, because the current solid wood flooring has been treated with insect and antiseptic treatment during processing, and there are many high-quality materials that are insect and ant resistant.

Therefore, as long as you buy regular products and follow the standard process construction, this problem can be eliminated.

In the process of use and maintenance of solid wood flooring, if the material selection and laying are improper, there will be some "common diseases", such as moths, cracks, noises, dirty boards, flower faces, drums and warping, etc., the following will talk about the diagnosis and treatment of the floor and the maintenance of the floor for these "diseases". Insect damage: Because of the bite of insects in the wood, piles of powder can often be seen on the surface of the floor, which is annoying.

The reason is related to the selection of flooring materials. In order to prevent insect moth, the first is to buy the floor produced by the drying kiln spray steaming process, although the price is more expensive, but all the insect eggs in the wood have been killed; The second is to carefully select the keel, where there are insect eyes or bark, do not use. Slitch:

Some floors have been laid for several days, and large gaps have appeared between the slats. This is mostly related to the high moisture content of the floor before laying, which shrinks due to high indoor temperature or air drying. It should be noted that the moisture content of the floor should be in the range of 8%-13% before laying, and the oil should be applied in time after paving.

Noise: Due to the low quality of the floor laying, people will make a creaking sound when they walk on it, which is uncomfortable to hear. For this reason, it is necessary to pay attention to the strong connection between the keel and the ground, the floor and the keel, and the number and length of nails are appropriate.

At the same time, it is necessary to prevent the keel spacing from being too large or the moisture content is too high, otherwise it will dry and shrink loose after laying, which will also cause a certain impact.