-
Anonymous users2024-01-24The float valve is broken, replace one.
-
Anonymous users2024-01-23Find someone to fix it at the seller's place, you have to find a professional to do this professional thing.
-
Anonymous users2024-01-22Change the float valve, if you don't understand, you can call after-sales service to do, they will repair it!
I've had this problem before! You plug the holes (on both sides of the drain in the toilet base) and it creates a vacuum! Now you have two options: 1 handle the hole is not clogged, and the taste is still tolerable. >>>More
Dismantle the toilet bowl and remove the cement from where it was originally installed. Go to the building materials market or buy a flange where you sell hardware and building materials (install a special toilet one, less than 10 yuan, you know it as soon as you say it.) Just use this thing to connect one end to the toilet bowl and the other end to the drain outlet. >>>More
Hello, make a suggestion, if you don't know how to drum, you can go to the place that sells toilets and ask at that time. In fact, it is very simple, the left side of the picture on the left is for adjustment, as long as you can turn it on and slide the water down, it will not be good. Because it is normal not to get it if you haven't touched it, and the upper button on the toilet tank lid is not good for water, your current problem is that the button of the water tank lid is down, you can solve it by looking at it. >>>More
Toilet Tank Overflow Solution:
1. The pumping tank has been filled with water, but the water is still continuously poured up until it overflows. >>>More
You can fill the mineral water bottle with water and put it into the water tank, and put a few more water bottles full of water, which will keep the water in the tank half a tank, and the effect of raising water is very obvious.