What to do if the toilet tank is too full and overflows from the top of the tank

Toilet Tank Overflow Solution:

1. The pumping tank has been filled with water, but the water is still continuously poured up until it overflows.

In this case, you can try to do a test check first: lift the water drift up with your hands to see if there is still water, if not, it means that the position of the water drift is not suitable.

At this point, it is enough to lower the water drift position, which can increase the buoyancy to close the inlet valve port. If there is still water inlet after lifting the water bleaching, it is very likely that there is a problem with the components of the automatic water inlet valve, and you need to ask the water master to check and repair it.

2. The toilet tank overflows from the side, just like putting the cup crookedly, and a trickle flows out of the water tank.

The toilet bowl is constantly filled with water and overflows to the side, which generally means that there is a problem with the inlet valve, and the quality of the inlet valve is considered first, and then it is not ruled out that it is caused by improper installation.

If you used it well a few days ago and didn't touch the toilet and suddenly it overflowed, it means that the inlet valve is out of order, so you can replace it with an inlet valve of the same specification. If it is not installed properly, you can open the inlet valve floating bucket to see if there are any impurities, and if so, just adjust the orientation.

Two reasons.

bai, one is that the position of the float du is too high, and the other is the leakage of the dao racket in the water tank of the horse, if the position of the water float version is too high, you only need to adjust the screws at the fixed end of the float to control the water level of the float, if it is a leakage of the accessories into the water, you can change the accessories.

A toilet, also called a toilet, is a bucket with a lid for urinating and urinating. The invention of the toilet is known as a great invention, which solved the problem of people eating and drinking in and out of Lazar. Later, it gradually evolved into a flush toilet using the principles of siphon, spiral siphon, and now the latest jet siphon and super-siphon type.

There are also people who believe that the flush toilet is the root of all evil because it consumes a lot of domestic water. There are many classifications of toilets, including split and conjoined. With the development of science and technology, many novel varieties have also appeared.

The toilet tank is too full of water overflowing from the top of the tank:

1. Open the water tank of the toilet bowl and see that the water scoop inside the water tank is on that horizontal line, if it is full.

dao, it will leak out.

2. Pull the card position of the water scoop up and down to watch the sensitivity of the water scoop, if it is not smooth, the device has failed, press it down a little.

3. You can remove the equipment of the water scoop and clean it, and you can continue to use it, if it doesn't work, you need to replace it.

Quality Identification Tips:

1. Look at the certification mark and certificate: many water tank accessories have not passed the China water-saving certification, if the accessories have the United States UPC certification means that his products can enter the United States market sales, this is an objective criterion for reference, please remember!

2. Look at the weight and weight in your hands, if it feels very heavy and heavy, it means that it is genuine.

3. Smell: see if there is a pungent smell, if not, it is a reliable quality.

4. Press: Easily press the drain valve by hand, do you feel relaxed? Ease is a good product.

5. Look at the color of the product, the plastic of the inlet valve must be translucent plastic color, if it is a peculiar color or opaque, it is the material shrinking and stealing materials.

6. Look at the smoothness of the surface of the product, whether the mold is fine, whether there is flash, burr, etc., if there is no representation.

That may be a problem with the management of water ingress, you can find a maintenance master to take a look.

There are two reasons, one is that the float is too high, and the other is that the paddle inside the toilet tank is leaking.

If the position of the float is too high, you only need to adjust the screws at the fixed end of the float to control the water level of the float.

If the fitting that enters the water is leaking, you can change the accessory.

1. The pumping tank has been filled with water, but the water is still continuously poured up until it overflows.

In this case, we can try to try to do a right under the test first:

Lift the water drift up with your hands to see if there is still water ingress, if not, it means that the position of the water drift is not suitable. At this point, it is enough to lower the water drift position, which can increase the buoyancy to close the inlet valve port. If there is still water inlet after lifting the water bleaching, it is very likely that there is a problem with the components of the automatic water inlet valve, and you need to ask the water master to check and repair it.

The toilet tank is overflowing.

2. The toilet tank overflows from the side, just like putting the cup crookedly, and a trickle flows out of the water tank.

The toilet bowl is constantly filled with water and overflows to the side, which generally means that there is a problem with the inlet valve, and the quality of the inlet valve is considered first, and then it is not ruled out that it is caused by improper installation. If you used it well a few days ago and didn't touch the toilet and suddenly it overflowed, it means that the inlet valve is out of order, so you can replace it with an inlet valve of the same specification. If it is not installed properly, you can open the inlet valve floating bucket to see if there are any impurities, and if so, just adjust the orientation.

The problem with the float piston, just change it. The high-level water inlet and outlet water integration will be completely replaced.

Adjust the water level height of the inlet float.

It's just that the water keeps in, the ball doesn't bounce anymore, and the water inlet accessories are replaced, and it's okay. Jane Ai Sanitary Ware After-sales Service Department.

It's all official! In fact, a dime can solve it. Generally not

For more than 10 years, the basic DAO does not specifically consider the problem of cushions. You first turn on the water inlet to the maximum, and then after the toilet is discharged, look at the water inlet speed, if there is no fierce sound of water intake, congratulations, basically such a problem can be solved with a dime and a cotton swab. Generally, the inlet hose and toilet link screws have a filter screen, disassemble and take it off for cleaning, if you can't see it or can't take it off, wipe it blindly with a cotton swab and wipe it several times.

Then install it, and you're good to go. In fact, the water pressure of the toilet inlet is very important.

Generally, it is the same as the physical fitness test, the content of each place is different, I tested: long jump, 800 meters, throwing a solid ball, some of the test is skipping rope, if you practice hard, it is not a problem to get a high score, come on.

1. The pumping tank has been filled with water, but the water is still constantly poured up until it overflows.

In this case, we can try to do a test check first

Lift the water drift up with your hands to see if there is still water ingress, if not, it means that the position of the water drift is not suitable. At this point, it is enough to lower the water drift position, which can increase the buoyancy to close the inlet valve port. If there is still water inlet after lifting the water bleaching, it is very likely that there is a problem with the components of the automatic water inlet valve, and you need to ask the water master to check and repair it.

The toilet tank is overflowing.

2. The toilet tank overflows from the side, just like putting the cup crookedly, and a trickle flows out of the water tank.

The toilet bowl is constantly filled with water and overflows to the side, which generally means that there is a problem with the inlet valve, and the quality of the inlet valve is considered first, and then it is not ruled out that it is caused by improper installation. If you used it well a few days ago and didn't touch the toilet and suddenly it overflowed, it means that the inlet valve is out of order, so you can replace it with an inlet valve of the same specification. If it is not installed properly, you can open the inlet valve floating bucket to see if there are any impurities, and if so, just adjust the orientation.

You can adjust the level of the water level, if it can't be adjusted, it means that the water is broken.