Who can tell me how to maintain the solid wood floor?

1. Keep the floor dry and clean, and avoid contact with a lot of water. It is not allowed to scrub with corrosive liquids such as alkaline water and soapy water to avoid damage to the paint film, and it can be wiped with a wrung out cotton mop, not with a wet mop, gasoline, flammable materials and high-temperature liquids.

2. Waxing every once in a while, the time interval depends on the finish of the floor paint. The method is to first wipe the floor with a semi-dry rag and wax it. To spread evenly and "soak" the floor surface, wait for it to dry a little and then wipe it back and forth with a soft cloth until it is smooth and translucent.

3. If you accidentally pour water or leave water on the ground, you must wipe it with a dry soft cloth in time. After wiping it clean, do not directly expose it to the sun or bake it on an electric stove, so as not to dry too quickly and the floor will dry and crack.

4. Do not throw cigarette butts or matches and other kindling on the floor to avoid scorching the surface of the floor; Avoid sharp, sharp objects, scratches, and heavy objects that are pressed for long periods of time.

5. After paving, the floor should be exposed to direct sunlight as much as possible, so as to avoid excessive ultraviolet radiation of the paint and early cracking and aging.

6. If the paved floor is not inhabited for a long time, it is necessary to open the window frequently for ventilation, and do not cover it with plastic sheets or newspapers. Over time, the paint film will become sticky and lose its luster. At the same time, do not directly contact the floor with objects with high temperatures, if the indoor air humidity is lower than 40, you need to increase the temperature appropriately, if the humidity is greater than 100, you need to take dehumidification measures.

If it is said that it is the maintenance method of solid wood flooring: of course, it is best to regularly rub the teak oil extracted from the teak body. Teak oil maintenance of pure solid wood is easier (direct rubbing) more environmentally friendly (free formaldehyde, stupid, toluene, xylene and ethylbenzene are zero) greener (teak body refining) more low-carbon (keep the furniture bright as new for a long time, long-term use, greatly extend the service life of the furniture,) more money and effort (no need for any additives, truly DIY) from color to characteristics (water, moisture, corruption, sun, insects, ants, ultraviolet rays, enhance the hardness of the wood surface, not easy to crack, warp and fall off, strong and durable, fire resistance, acid and alkali resistance, etc.) are all derived from nature!

Pure natural teak primary color, after rubbing will not cover the texture of your wood, on the contrary, the wood texture is clearer and more natural, the wood ink line is more beautiful, it is not reflective after use, the grease is aggravated, there will be a sense of lubrication when touching, and the furniture is not easy to scratch and so on.