Bathroom leaking, leaking water along the squatting toilet pipe downstairs, has ruled out all other

Landlord, it is recommended to test it carefully in the following way.

1. Test whether the inlet pipe is leaking.

1) If it keeps dripping, turn off the main gate first, open all the faucets in the house and drain all the water in the pipes, and then turn off the faucet.

Note: Do not use any water after two or three hours for half a day or a full day.

2) After confirming that the dripping water downstairs has stopped, open the main gate again, and do not use any water for half a day or a whole day after two or three hours.

4) If there is a drop of water downstairs, it means that the inlet pipe is leaking, if it is not dripping for more than a day, it means that it should not be a leak in the inlet pipe.

2. Test whether the drain pipe or floor drain is leaking.

1) Find a soft water pipe with one end connected to the faucet, and one end to the floor drain to flush, insist on more than half an hour to see if there will be water leakage downstairs.

Note: Do not let any water flow outside the floor drain at this time, so that you can accurately test whether there is a drain leaking problem.

If it is confirmed that the water pipe is leaking, it can only be dismantled, and there is no easy way to deal with it.

The landlord should not be a leakage of the pipeline, after the detection if it is not a pipe leakage is very good to manage, can be solved without planing or dismantling, search for the first 4 words of the user name can find us, we have a professional waterproof engineer to guide you to solve the problem of water leakage.

The outlet of the toilet is not aligned with the outlet of the sewer pipe, resulting in the flush leaking to the ground, and then there is a problem with the waterproofing of the floor, which penetrates downstairs.

Solution: Reinstall the toilet and make it waterproof again.

There is a rubber joint between the squatting toilet and the water pipe, and the problem that often occurs, just change it, and the specific location is between the water pipe and the squatting toilet.

The squatting toilet water inlet pipe has a long time and leaks, and it needs to be reconnected by opening the ground. The ground waterproof layer is also filled with water, and the waterproof layer is also old and leaking, so it is more cost-effective to change the toilet waterproofing at one time.

The water pipe is not sealed enough when it is closed.

You check whether the squatting toilet is damaged, whether the squatting toilet has a flush valve, if it is installed, it is leaking behind the squatting toilet, and it may leak behind the reverse water when the flush is not installed, if the water valve is closed and leaking slowly, the water valve is leaking, it may be that you install the water leakage at the interface behind the squatting toilet.

It should be related to the leakage of the sewer interface, this place must be repaired, more information, better advice, free professional technical consultation on concrete waterproof leakage repair, to avoid the trouble of repairing today, leaking tomorrow, repairing every year, and leaking every year.

Hello! According to your description, the possible cause is in the pipe that feeds the toilet from the tap water, because there is no odor, it may be clean water, and the main valve stops leaking.

1. In this way, you try to check the pipeline from the wall to the water collection tank, 2. Check the wall water supply pipe to the main valve pipe, and do the pressure test experiment. 3. You can also find a decoration company to repair it.

The biggest cause of water leakage at the interface is because the leaky water has no odor!

The flush toilet is broken, just replace it, or find property management, the general community has but, let them be repaired.

It must be a leak in the flush pipe or the connection between the flush pipe and the squatting stool.

The water pipe broke. Pipes that supply water to the toilet bowl with tap water.