-
Anonymous users2024-01-24Put glass glue on the float gasket, if it is leaking from the water tank, install it, if it doesn't work, see if the float is damaged, it can be replaced: if the bottom of the toilet is leaking, or remove and reinstall, if so, if not, hit the glass glue, can not be used within 24 hours, take off the float. Poor posture is as slippery as a float leakage, and if you replace it, you can take off the draining machine core and clean up the scale and wax.
-
Anonymous users2024-01-23Plug it with cement, and then go to find some plastic steel soil to make up for it.
-
Anonymous users2024-01-22From which part of the leakage, if it is leaking from the water tank, you can take off the drain machine core, clean up the scale, if not, can be replaced: if the bottom of the toilet is leaking, hit glass glue, can not be used within 24 hours, or remove and reinstall. If the float is leaking, see if the float is damaged, if yes, replace it, if not, take off the float, put glass glue on the float gasket, and install it.
-
Anonymous users2024-01-21I don't understand, what kind of retractable drain pipe is under the toilet?
Both are similar in terms of usage: mix them with water to form a sticky paste and rub them over the gaps. Finally, use your index finger to wipe it, and then stick it to the tile next to it and wipe it off with a dry rag after it dries slightly. >>>More
Ceramic can only be replaced with an entire toilet.
The plastic water tank can be temporarily glued with AB, and the water tank has to be replaced for a long time. >>>More
A leak under the toilet base indicates that the main riser is not smooth, and it is best to find a professional sewer master to dredge the sewer so that it will not leak.
Flush toilet leaking, right? Look at the leakage.
If the inlet pipe is leaking, it will cost more than ten to twenty yuan to replace one. >>>More
Check if the flush switch is reset. The plastic flush switch of some flush toilets will occasionally get stuck after being worn for a long time and cannot be restored. Generally, the switch can be reset by repeating it several times. Check whether the rubber gasket of the drain port under the ball valve is aged and the seal is not tight, and the problem needs to be replaced. >>>More