-
Anonymous users2024-01-24If your home is an old building, cast iron sewerage, it is best to use a straight row, because the cast iron sewer pipe has an S bend, if it is a siphon, the toilet itself has an S bend, plus the sewer pipe is two S-bends, which is not conducive to flushing, if it is a PPR pipe or a new building, it is best to use a jet siphon, the best to prevent cheapness, 600 yuan is also good, but it is not easy to find if it is 600, and you will know what regret is when you use miscellaneous brands. It is recommended to go to the specialty building materials store to buy, actually, B&Q, Oriental Home, Home Depot. Wait, I haven't heard of COCO, but there is TOTO, and the Japanese one is very good, but two or six hundred can buy it.
Now in the ware, Ottoman. Meijiahua, Dongpeng, Huida. It's all good, the price is not very high.
Check it out for yourself, you might be able to buy it.
Ginness ??? I haven't heard of it! ~~
-
Anonymous users2024-01-23Personally, I feel that it is better to go straight, and I don't know anything else.
As far as the brand is concerned, the price you said is best to use COCO.
-
Anonymous users2024-01-22The diameter of the sewage outlet is large, the flushing water level is high, the flow rate is large, and the splash-proof and self-cleaning function is good.
The reason for the air hammer is that some places below you may be blocked, but the blockage is not bad.
Is it straight to ask when you buy, it should be said that this price is not expensive.
Reasons why the toilet won't drain:
1.Nowadays, a filter will be placed in the toilet tank, and after the filter is used for a long time, it will deteriorate and cause more scale to cause the filter to clog, etc., so it will cause the tap water in the tank to not enter smoothly. >>>More
The key is that the rubber pad (may be an engineering plastic cushion) at the water inlet can not suppress the water flow of the inlet, and a rubber pad of the same size as the water inlet can be cut and glued to the original rubber pad (may be an engineering plastic cushion) with universal tape, so as to increase the pressure of pressing the water flow of the inlet water, and the float ball will reach a certain height with the water level, and the rubber pad (may be an engineering plastic cushion) will be added by the lever to easily block the water flow of the inlet water. There is also a step to tighten the cushion by turning the screws behind the engineering plastic cushion to adjust the tightness of the cushion in a clockwise direction a few times to tighten the cushion. In this way, the problem of water leakage is solved.
This belongs to mechanical failure, that is, the accessories in the tank are not flexible caused by the activity, mainly to see whether the model of the accessories and the internal installation structure have friction with each other, adjust it, most of the plugged chains are short or the float (float) of the water valve has the phenomenon of the card owner, you will see it if you look carefully, try to see if you can't send the picture inside the water tank, it is good to analyze, in view of the limited number of answers to questions and supplementary answers, you can contact in a private message