-
Anonymous users2024-01-23Is it straight to ask when you buy, it should be said that this price is not expensive.
-
Anonymous users2024-01-22It's okay, the toilet is sealed with glass glue around the ground contact for the sake of fixing and aesthetics. As long as you don't let the toilet move, it's fine.
-
Anonymous users2024-01-21Ha ha..
It's okay, as long as you haven't touched it, it's fine, the main thing is that you're afraid of moving. and wet water at the bottom.
It's okay. Ann.
-
Anonymous users2024-01-20There is no problem with this, as long as it doesn't move, it's nothing, and the reason is that the glass glue has a stable time, and the main fear is that if it moves, it will cause gaps.
The key is that the rubber pad (may be an engineering plastic cushion) at the water inlet can not suppress the water flow of the inlet, and a rubber pad of the same size as the water inlet can be cut and glued to the original rubber pad (may be an engineering plastic cushion) with universal tape, so as to increase the pressure of pressing the water flow of the inlet water, and the float ball will reach a certain height with the water level, and the rubber pad (may be an engineering plastic cushion) will be added by the lever to easily block the water flow of the inlet water. There is also a step to tighten the cushion by turning the screws behind the engineering plastic cushion to adjust the tightness of the cushion in a clockwise direction a few times to tighten the cushion. In this way, the problem of water leakage is solved.
The reason for the air hammer is that some places below you may be blocked, but the blockage is not bad.
This belongs to mechanical failure, that is, the accessories in the tank are not flexible caused by the activity, mainly to see whether the model of the accessories and the internal installation structure have friction with each other, adjust it, most of the plugged chains are short or the float (float) of the water valve has the phenomenon of the card owner, you will see it if you look carefully, try to see if you can't send the picture inside the water tank, it is good to analyze, in view of the limited number of answers to questions and supplementary answers, you can contact in a private message
Reasons why the toilet won't drain:
1.Nowadays, a filter will be placed in the toilet tank, and after the filter is used for a long time, it will deteriorate and cause more scale to cause the filter to clog, etc., so it will cause the tap water in the tank to not enter smoothly. >>>More
The water output is controlled by the middle one, you can use the big key to try the water output first, and then try the small key, if the installation is reversed at that time you just turn the button on the lid off the head, please adopt it.