-
Anonymous users2024-01-24Send a picture to see. You haven't done water stop in the bathroom, that's it.
Water retaining. Open the door stone at the door of the bathroom, disassemble the bathroom door cover, brush the two sides of the bathroom door with a waterproof 30 cm high, extend to the bottom of the door, and use the door stone directly.
The king of water does not leak or plugs the leakage, and all of them are pressed to death. If you haven't brushed the waterproof bathroom, you don't have to find another way, just pick it all open and brush it waterproof again.
-
Anonymous users2024-01-231.If the door has already been installed, you can only chisel two or three doorway stones on the inside of the door, brush the inside of the brick with waterproofing, and then re-paste the brick.
2.If the door has not been installed, you can chisel all the door stones, brush the inside of the brick to waterproof, and finally re-paste the brick.
3.The main reason for the seepage of water from the door stone is that the construction team did not deal with it well during construction. If you want to ensure that there is no water seepage, it is recommended to add a waterproof pier under the doorstone, and then brush the waterproof pier on the waterproof 4
Apply an inverted U-shaped doorway stone. The inverted U-shaped door stone with the water stop pier is the most perfect combination to solve the water seepage at the door, but most people still use the slotted door stone, and there are very few people who use the inverted U-shaped door stone.
Send a picture to see. You haven't done a water stop in the bathroom, this is the water retainer. Open the door stone at the door of the bathroom, disassemble the bathroom door cover, brush the waterproof 30 cm high on both sides of the bathroom door, extend to the bottom of the door, and directly use the door stone to prevent water leakage or plug the leakage, all pressed to death. >>>More
It shows that the slope of the ground in the bathroom is not enough, the drainage is not timely, or the drainage is not smooth, so it will seep into the bedroom through the threshold stone. The solution is to unclog the drain in the bathroom and, if possible, re-level and re-lay the floor. At the same time, between the bathroom floor and the sill stone, use glass glue to prevent the floor capillary from absorbing water.
Contact the property and let it see. If you make it yourself, hit it with glass glue.
You'll have to check it out with the person who renovated it! What causes water seepage! Then order a solution.
One is that your household washes the kitchen and bathroom, and the master door board can't play the waterproof function, and the other is to see if the triangle valve and faucet are leaking? , three treatment methods, kitchen, bathroom, balcony where there is water, the door is closed with glass glue, the shower room water retaining strip is also, try not to wash, wet a little mop to wipe it,