The toilet is not blocked, why is the water boring

The toilet is not blocked, why is the water boring

There may be many reasons why the toilet is not blocked, and the sewer is blocked or narrowed in the empty position next to the sewer pipe, such as the sewer pipe is blocked, the sewer pipe is bent and the water flow is blocked, and the sewer pipe is leaking. It is recommended that you check the cleanliness of the sewer pipes and whether there are any narrows or bends. In addition, it is also important to check whether the toilet tank and faucet are clean and unblocked, whether the water level is coarse and bright, and whether there are any leaks.

If necessary, you can contact a professional for inspection and repair.

Summary. Hello dear! We're happy to answer for you!

There are several reasons why the toilet is not clogged but the drain is not draining:1When the amount of water in the tank is reduced, the toilet water cannot be flushed away, and then the water is not drained, and in this case, it is necessary to find a solution according to the different types of toilets.

If it is a top-press toilet, it is mainly due to the change in the length of the pressure rod, which causes the water stop pad to quickly reset and stop the water, at this time, we only need to open the water tank cover, reverse, loosen the pressure rod nut, and adjust the length of the pressure rod to a suitable position to solve the <>

The toilet is not blocked, why is the water boring

Hello dear! We're happy to answer for you! There are several reasons why the toilet is not clogged but the drain is not draining:

1.When the amount of water in the tank decreases, the toilet water cannot be flushed away, and then the water is not drained. If it is a top-press toilet, it is mainly due to the change in the length of the pressure rod with the height of the group, and the guide or reed-induced water stop pad quickly resets the water stop, at this time we only need to open the water tank cover, reverse, loosen the pressure rod nut, and adjust the length of the pressure rod to a suitable position to solve the <>

> pro, 2The low water level of the inlet valve is also an important factor in the slow draining of the toilet. The solution is to remove the inlet valve, remove the inlet valve buckle, rotate the inlet valve body counterclockwise, extend the height of the body according to the corresponding length, and then rotate the inlet valve body clockwise.

And install the buckle, install the inlet valve, connect the filter and the inlet pipe, and solve the problem. 3.If the ceramic glaze of the toilet wall is not smooth enough, it is easy to hang dirt, the toilet flush is not clean, this call is stupid is a product quality problem, the glaze material is not good, try to choose a well-known brand <>of Li Lian when buying a toilet, the glaze is smooth, and the quality is more guaranteed

The toilet is not blocked, why is the water boring

The toilet is not clogged, but the drain is not draining for the following reasons:1The toilet bowl itself does not flush well, resulting in a lack of drainage.

2.The toilet was installed incorrectly, only the drainage pipe was installed, and the sewage pipe was not installed, resulting in a weak drainage. 3.

The rubber mat of the toilet base is damaged, causing the drain to be sluggish. 4.The toilet has been used for a long time and is not cleaned in time, and the toilet outlet is clogged with dirt, resulting in hail and laughter.

5.There is a problem with the design of the toilet itself, and the source of the guide is bright and the drain is not energetic. It is recommended that you perform a comprehensive inspection and repair of the toilet bowl to ensure that it is working properly.

But the pants were not repaired in the following way:

Look at whether there is a trap in the pipe, because the toilet itself has a trap, and there is air between the two traps, and the air pressure cannot be pressed, so it is impossible to get into the water. Solution: Open the vent at the back of the toilet.

Or you can place a plastic bottle filled with water inside the toilet tank to make the silver leakage level in the toilet tank higher; You can also adjust the inlet valve inside the toilet tank, as long as the screw on the inlet room is rotated in a clockwise direction, you can also make the water level in the toilet tank higher.

The toilet is not clogged, but the solution to the drain is not interesting:

The toilet is not clogged, but it is still draining slowly, and it is possible that the current water pressure is relatively low. The water capacity in the home is not particularly large, and if there is not enough flush after pressing the toilet, it will lead to the problem of running out of water. In this case, it is necessary to increase the amount of water inside the tank, or the water level of the inlet valve can be adjusted higher, so that the water inside can be increased.

It may also be a problem with the quality of the toilet, such as a big brand of toilet bowl, basically this kind of problem is relatively rare. If the design of Ryono itself is unreasonable, resulting in poor use effect, you can consider replacing it with a new toilet and re-selecting a good quality brand to buy again.

Toilet

Toilet generally refers to toilet, belongs to a kind of sanitary appliance in the field of building water supply and drainage materials, the main technical characteristics of this utility model toilet are that: in the upper part of the existing toilet S-type water trap, install a cleaning bolt, similar to the drainage pipe installation inspection port or cleaning mouth to clean up the silt, after the toilet occurs silting, the user himself can use this cleaning bolt conveniently, quickly.

The toilet can be divided into two types: split toilet and one-piece toilet, generally, the space occupied by the split toilet is larger, and the space occupied by the one-piece toilet is smaller. In addition, the shape of the split toilet should be more traditional and the price is relatively cheap, and the one-piece toilet should be novel and high-end, and the price is relatively high.

The reasons why the toilet is not blocked and the drain is weak include: the toilet pressure rod is loose and bright, the siphon toilet flange is not tightly blocked, there is dirt on the inner wall or the sewage pipeline under the toilet is blocked, etc.

1. The toilet pressure rod is loose and shortened.

Now the toilet is generally a press flush key bridge, the water tank cover has a press button, the back of the key is a pressure bar, and the water output is large when adjusting the long press, if it is used for a long time, the slip wire will be loose, which will lead to a smaller length, so there will be a weak flush.

>2. The flange of the siphon toilet is not tightly sealed.

The siphon toilet has an S-bend drain line inside, which produces a siphon phenomenon and sucks away the dirt. It is beneficial to the tightness of the suction pipeline, and uses the action of water gravity and atmospheric pressure to produce the siphon phenomenon. When the flange of the sewage outlet is not tightly sealed, the suction pipe is breathable, which will lead to the weakness of the toilet drainage.

>3. There is dirt on the inner wall or the sewage pipeline under the toilet is blocked.

Although the toilet is not completely blocked, the inner wall of the pipeline is rough, which will lead to increased resistance to flushing, and the water flow will be relatively slow, resulting in weak toilet drainage.

How to solve the problem of toilet flushing

1. Adjust the length of the toilet flush key pressure lever.

When the toilet flush is weak, first open the toilet tank lid, put it upside down, and adjust the two pressure rods respectively. The clockwise twist becomes shorter, the amount of water becomes smaller, and the counterclockwise twist becomes longer, and the toilet bowl will produce more water. Adjust to the appropriate position, and then tighten the nut tightly to fix the pressure rod, which is a good solution to the situation that the toilet flush is weak.

2. Check the toilet sealing flange.

If the sealing flange is aging or not installed in place, it is recommended to replace it with a new one, and install the toilet well, no air leakage, which can solve the situation of weak drainage.

3. Clean the toilet drain thoroughly.

The toilet is slightly blocked, you can clean the drainage pipe thoroughly, it is recommended to use a special detergent, and rinse it many times, so that the inner wall of the drainage pipe is smooth and the pipe is unblocked, so that the water flow will be very smooth.

The toilet is not blocked, why is the water boring

Hello dear, let you wait a long time to dismantle the core<>

> If your toilet is not clogged, but the drain is causing problems, it could be one of the following reasons:1The water level in the water tank is too low, check the water tank to check whether the water level is normal, if the water level is lower than the notch of the water tank, you need to adjust the water level regulator in the water tank.

2.Clogged water pipes. Check the drain for blockages, possibly due to solid matter blocking the drains, you can use a pipe unclogging tool or pour in table salt and boiling water to unclog it.

3.The suction port is clogged. If the suction port inside the toilet bowl is clogged with foreign objects such as sanitary napkins and wet wipes, it will become difficult to drain the water, so please clean the suction port promptly.

4.Internal failure of the toilet system. Problems can stem from faulty components inside the toilet, such as clogged toilet drains or sedimentation tanks, damaged flush valve spools, etc., which can often require a professional to repair or replace.

Hope the above information is helpful to you. <>

The toilet is not blocked, why is the water boring

Toilet drain can be caused by the following reasons:1Sewer clogged:

There may be a build-up of dirt or foreign matter in the sewer pipes, resulting in poor drainage. You can use professional pipe dredging equipment or chemical sun Yingpei dredging agent to clean the pipes. 2.

Insufficient water in the water tank: If the water in the tank is insufficient, it will cause the toilet to drain poorly. The float inside the tank or the water level controller can be adjusted to increase the amount of water.

3.Poor plumbing design: Poor plumbing design can also lead to poor toilet drainage, such as excessive bending or small diameter of sewer pipes.

This situation needs to be checked and modified by a professional. 4.Problems with the toilet itself:

There may be problems with the drain pipes inside the toilet, such as bent pipes, clogged pipes, etc., that need to be inspected and repaired. To sum up, the toilet drain may be caused by a variety of reasons, which need to be eliminated and inspected first, and then repaired or modified accordingly for specific reasons. If you are unsure of what the problem is, it is advisable to have it checked and repaired by a professional.

The toilet is not blocked, why is the water boring

A sluggish toilet drain may be caused by a clogged sewer pipe or a bent pipe that causes poor water flow. It is recommended that you can try the following methods:1

Use a toilet unclogger to clean the toilet drain to remove clogged substances. 2.Check whether the sewer pipe is blocked, you can use a sewer dredge or a professional pipe cleaning service.

3.To check whether the sewer pipe is bent or damaged, you need to find a professional pipe repair service to inspect and repair. If none of the above methods can solve the problem, it is recommended that you contact a professional plumbing repair service for inspection and repair.