-
Anonymous users2024-01-24There are two methods, use scaffolding to line up or use steel pipes to build a scaffolding and row a springboard on top of the rack.
Then repair or replace the damaged material, if it is because of water leakage at the joint, then, use structural adhesive (or weather-resistant adhesive) to make up the leakage, do not use ordinary glass glue.
Look at the degree of soaking.
If the degree of soaking is light, and the gypsum board does not appear convex, let it dry naturally, and then cut out the yellowed plugging nail hole clay for reprocessing, and use sandpaper to sand off the latex paint for other yellowed parts, and re-brush the latex paint twice in the local area to see it. >>>More
Gypsum powder + binder + water, stir into a paste, fill the gap, smooth it and then stick it to the gap with a caulking tape, and apply it again.
When the gypsum board is suspended, the wire is generally threaded into the concrete. Before the gypsum board ceiling, when the line is rebuilt, it is necessary to wear and fix it on the top surface with PVC or KBG threading pipe in advance, and reserve about 80 cm long wires in the place where the lamp needs to be installed, and hang it with a metal hose to cover the curve. >>>More
Is it serious? If it is serious, it will be knocked out and re-done, and if it is not serious, it will be repaired with glue.