-
Anonymous users2024-01-24When the gypsum board is suspended, the wire is generally threaded into the concrete. Before the gypsum board ceiling, when the line is rebuilt, it is necessary to wear and fix it on the top surface with PVC or KBG threading pipe in advance, and reserve about 80 cm long wires in the place where the lamp needs to be installed, and hang it with a metal hose to cover the curve.
Suspended ceiling (English name: sprung roof) refers to the top decoration of the living environment of the house. To put it simply, it refers to the decoration of the ceiling, which is one of the important parts of interior decoration.
The ceiling has the functions of heat preservation, heat insulation, sound insulation and sound absorption, and is also a hidden layer for electrical, ventilation and air conditioning, communication and fire prevention, alarm pipeline equipment and other projects.
Home improvement ceiling is a common link in home improvement. Suspended ceilings are classified differently according to the material of the decorative panel. Ceiling decoration materials are the main basis for distinguishing the name of the ceiling, mainly including:
Light steel keel gypsum board ceiling, gypsum board ceiling, mineral wool board ceiling, plywood ceiling, special-shaped long aluminum gusset ceiling, square painted aluminum gusset ceiling, stained glass ceiling, aluminum honeycomb perforated sound-absorbing board ceiling, etc.
-
Anonymous users2024-01-23Before the gypsum board ceiling, the line should be worn in advance with PVC or KBG threading pipe and fixed on the top surface, and the wire about 80 cm long should be reserved in the place where the lamp needs to be installed, and the curve can be hung with a metal hose.
-
Anonymous users2024-01-22Put it on the inside of the gypsum board and walk along the ceiling keel. If you are wiring after the gypsum board ceiling is done, it is necessary to remove them according to the situation according to whether the gypsum board ceiling is buckle or fixed with screws, and then the wire is best laid through the pipe.
-
Anonymous users2024-01-21The wire copy is laid in the ceiling, and the line pipe can be installed on the ceiling when the height is small, and the ceiling can be hoisted when the height is high, and the hoisting spacing should meet the requirements of the specification. Flexible conduit can be used at the connection of lamps or equipment, and the length of flexible conduit (including metallic and non-metallic flexible conduit) is not greater than meters in power engineering and not more than meters in lighting engineering.
-
Anonymous users2024-01-20It needs to be embedded before the ceiling, and it can be hidden after the modeling.
Look at the degree of soaking.
If the degree of soaking is light, and the gypsum board does not appear convex, let it dry naturally, and then cut out the yellowed plugging nail hole clay for reprocessing, and use sandpaper to sand off the latex paint for other yellowed parts, and re-brush the latex paint twice in the local area to see it. >>>More
Gypsum powder + binder + water, stir into a paste, fill the gap, smooth it and then stick it to the gap with a caulking tape, and apply it again.
First, analyze the cause of cracking.
First, it is caused by material problems. In this case, it is more difficult to repair, and it is difficult to dismantle and redo. >>>More
It should be that the gypsum screws are not dotted with anti-rust paint, rust, dig up the yellow place, make up the anti-rust paint, and then take putty ash to make up the paint, or paste a bandage cloth on it, and then paint it.
It is understood that many owners like to use gypsum board to decorate when making ceilings, which is both good-looking and easy to construct, but gypsum board ceilings have a fatal shortcoming, that is, they are easy to crack. So what should I do if there are cracks in the gypsum board ceiling in the living room? Let's take a look! >>>More