-
Anonymous users2024-01-24It may be related to the design and construction of the piping system.
First, it may be too long away from the bathroom faucet pipe.
Second, there are too many elbows and too thin.
Third, it may be that the water outlet of the bathroom faucet is high, and the hot water outlet of the water heater is low (the installer is short or inexperienced, etc., may not pay attention to the installation position of the water heater wall to be high enough).
-
Anonymous users2024-01-231.What is the material of the pipe from the water heater to the bathroom? If it is stainless steel, it must be insulated.
2.How long is this distance? The longer it is, the more heat is lost, and the lower the water temperature becomes.
3.The flow rate of the water pipe is small and slow. The tube is thin or there is a jam at the joint.
4.Turn up the fire. ...
It may be that the shower head is clogged or the hot water valve is clogged, just clean it up.
It may be that the water pressure is small, you can adjust the water output of the water heater to increase it, if not, it may be that the hot water faucet and shower of the shower are blocked, and you need to remove it for inspection.
Hello, thank you for asking the company.
It is estimated that the pipeline is arranged incorrectly, and the toilet water pipe is connected near the water heater inlet pipe, causing turbulence and thus starting the water heater. It is recommended that you contact Haier customer service at 400-699-9999 and arrange professional technicians to come to the site for maintenance. >>>More
Gas water heaters are water-controlled and have a minimum water flow requirement, which is not met, and the water heater cannot release gas and turn on the ignition and cannot be used. >>>More
The water in the kitchen is hot and the bathroom is not hot, right?