-
Anonymous users2024-01-23Gas water heaters are water-controlled and have a minimum water flow requirement, which is not met, and the water heater cannot release gas and turn on the ignition and cannot be used.
It is recommended to check the water output of the hot water faucet, if it is small, it may be a problem caused by insufficient water flow.
The cold water is normal, the hot water output is small, you should consider why the original hot water is large, and now the hot water is small, the reason is that the scale deposit is more original, the problem of blocking the pipeline, the water flow rate does not meet the conditions, and the water heater can not be ignited.
There are many reasons why gas water heaters are not good for ignition, and any component damage of water, gas, and electricity will cause the water heater to fail to ignite. In fact, in many cases, the reason why the fire cannot be ignited is because the hot water pipeline is blocked due to the scaling of the waterway, resulting in a large back pressure of the waterway flow, which is large to a certain extent, and the water-gas linkage device will think that the hot water faucet has been closed and the gas channel is closed, and there is no gas, of course, it cannot be ignited.
It is recommended to clean and descale immediately, you can buy a set of gas water heater without removing the scale device online, use it to inject descaling agent into the water heater to clean the inside of the water heater and the inside of the hot water pipeline, the operation is simple and convenient, and it can be cleaned regularly after use, when this problem can be avoided again.
It is very safe, as long as it meets the installation regulations and keeps a safe distance from the open flame, it must not be installed in the bathroom.
Judging by your photos, there is a slight problem. These aspects are good. The first is that the gas water heater is connected to the pipeline with a special metal pipe and has a valve, and the second is the strong exhaust water heater three, which has a certain distance from the stove and is not vertically above. >>>More
Clean the pipes with vinegar, preferably for four or five hours in pipes that do not produce hot water, to ensure that it is effective.
Hello, thank you for asking the company.
It is estimated that the pipeline is arranged incorrectly, and the toilet water pipe is connected near the water heater inlet pipe, causing turbulence and thus starting the water heater. It is recommended that you contact Haier customer service at 400-699-9999 and arrange professional technicians to come to the site for maintenance. >>>More
This situation should be the mechanical version of the gas water heater, the water-gas linkage valve is faulty, and the gas cannot be turned off immediately after the water is turned off.