-
Anonymous users2024-01-24When we find that the toilet is blocked and can't go down, we must first deal with it calmly, and here are some ways to deal with it:
1.Use a dredge to unclog the toilet: first suck the dredge full with water, and then press the dredge so that its head completely covers the toilet bowl's mouth, and move it down several times to dredge the blockage in the toilet.
2.Use the toilet bowl: Place the toilet toilet nozzle into the toilet bowl and press down several times to flush the blockage in the toilet bowl.
3.Use pipe unclogging agent: Pour the pipe unclogging agent into the toilet bowl and leave it for about half an hour, then flush the toilet bowl with clean water.
4.Use the hook to brighten the bury or wire: clamp the plugging material at the bend of the hook or wire, and pick it up or down to pull the plugging material out.
The above are some simple treatment methods, if these methods do not work, it means that the toilet water congestion is more serious, and you need to ask professional maintenance personnel to solve it. At the same time, we should also pay attention to the use of the toilet bowl and avoid throwing large solid materials into the toilet bowl to avoid causing blockages.
-
Anonymous users2024-01-23Looking for TFBOYS, uh, jokes. There must be a blockage inside, buy a leather pouch, and dredge it yourself, but if it doesn't work, you have to find someone to dredge it.
-
Anonymous users2024-01-22If you can't figure it out yourself, you can only find a professional toilet unclogger.
If the toilet is not flushed, it may be that the flushing water is insufficient, there is a water outage and other problems, you can remove the lid of the water tank and adjust the amount of water. There are two plastic rods under the toilet water button, and there are cocks on them to adjust the length of the plastic rods to control the amount of water. If it still doesn't work, you can only change the toilet. >>>More
This belongs to the unclean flushing, the pipe design is not good, and the siphon force is not large. Generally, a good siphon toilet flushes away the dirty things after a flush, and there is a jet hole in front of the toilet to flush the water to achieve the effect of replenishing water, so that the water that comes back is clean water. The pipe design is not good, because the siphon is powerless, only a part of it can be flushed away, and the light part hangs on the pipe wall, and then the follow-up water returns to the toilet pit, which is called slag. >>>More
If the toilet is blocked, there is water inside, and you can try the water puller, operation steps: >>>More
1. If the blockage is not very tight, go to the supermarket to buy a rubber suction for the toilet, and press it back and forth on the toilet bowl a few times, so that it is easier to pass when it is full of water. >>>More
The simple thing is to use the toilet plucker to pull back and forth under the toilet, which can dredge the smaller blockage, if there are other foreign body blockages, it is generally hooked out with a special hook rotation. >>>More