The first router in my house was wired, and in the living room I wanted to install another wireless

Updated on Living room 2024-07-15
1 answers
  1. Anonymous users2024-01-24

    There is a line in the living room, the computer in the living room should be the host, and a wire of the wireless router should be connected to the cat (broadband box). If you want to secure the wireless router, you can replace the wired one. The wireless router has three wires, a power cable, one connected to the computer, and one connected to the cat, and the manual of the specific router is written.

    After plugging in the line, open the network - local connection - properties - double click on the internt protocol - automatically get both IP and DNS - select - OK. Then use the browser-address to fill or,The description of this router says that it is also written,The password is admin,Enter the router settings,Each router below has its own setting method,See the manual for details。

Related questions
5 answers2024-07-15

Hello! There are two ways to connect a router to another router: >>>More

1 answers2024-07-15

You can buy Tengda's router, wait for the picture above for you.

5 answers2024-07-15

In fact, it's very simple, first connect the wireless router with a network cable, set up the wireless router, and then replace the wired router! (Wired and wireless can be used, wired for desktops, wireless for laptops and mobile phones). Steps: >>>More

1 answers2024-07-15

It is recommended to buy a 360 secure router 5G, set up a simple and 5G frequency band, which is more practical, and 5G Internet access is really fast, and the price is also affordable in comparison. Signal coverage area, wide air tremor, safe and stable, multi-mode, children's Internet management, free adjustment of WIFI strength, simple setting, support APP remote management.

4 answers2024-07-15

A: Yes.

Connect your computer directly with your second router first, enter with the IP address behind the router, there is an account password behind it, if you don't know, you can reset the router, change your router IP to the last digit of the first router after entering the router should be 1), the previous xxx is the same as the setting of your first router, turn off the DHCP in this router, and then connect a network cable from the LAN port of the first router to the LAN port of the second router. >>>More