-
Anonymous users2024-01-24Check the pressure bar under the button, some water parts become shorter after pressing for a long time, you can unscrew the pressure rod out. If it's not this problem, it's a water problem, and the water quality is too dirty to cause the spring to be insensitive.
-
Anonymous users2024-01-23Let's change a set of water pieces, it's not a lot of money. It may be that the slide rod and spring of this water piece are embroidered and not sensitive.
-
Anonymous users2024-01-22Let's change the set, or get a new toilet.
Some of them are caused by the problem of water alkali, try to use some vinegar or the like, and first dissolve the alkali, which can be better.
According to the size you talked about (the distance from the center of the sewer pipe to the wall is called the pit distance), go to the building materials market to choose the toilet according to the pit distance, less than 26CM can be used, and if you meet the requirements (of course, you have to style), and it is useless to buy if you don't meet.
1. All normal flush speeds: 8 to 15 seconds.
No one gets bored to flush the toilet all night. Don't you want to save water? >>>More
The toilet flush and the lid have nothing to do ......
You can do whatever you want. >>>More
First of all, check if the plug attached to the chain in the first picture is leaking, and if it is okay, see if there is still a sound of water entering the blue float. If it doesn't mean that everything is normal, the thin white plastic pipe on the top is used to fill the height of the water in the toilet after flushing the toilet, which plays the role of a water seal and prevents the odor from overflowing. >>>More