-
Anonymous users2024-01-24Of course, the metal tray is the first choice, and it is best if there are not many top pipelines to lay along the roof. Laying along the wall is not very easy to do and not very beautiful.
In the case of a new project, the design should have initially considered the specification. If it is a project that has been delivered, it is best to communicate with the property management party to see what requirements the property has.
The strength is separated, the amount of wiring in the bridge does not exceed 40% of the internal volume of the bridge, and the bridge connection is made of jumper wires, and one point is repeated grounding. Lay above the water pipe and at a safe distance. Horizontal and vertical, the practice of cross-beam and cross-pipe parts is beautiful, and the lowest point is not less than 200mm under the beam.
-
Anonymous users2024-01-23This only affects the aesthetics, and has nothing to do with the specification.
-
Anonymous users2024-01-22It's okay, there's no problem, many people who do this, you can also do hanger installation on the top plate.
-
Anonymous users2024-01-21Yes, it is better to use a trunking and separate it from the strong electricity.
Roll a little oxalic acid solution onto the wall to fully neutralize the alkalinity of the wall, and then be sure to wait for the wall to dry before brushing the paint.
Fire prevention and fire protection are the most important safety issues, and the other is oil smoke discharge, drainage, and water supply. I won't talk much about oil smoke, everyone doesn't want to smell oil smoke when they go to work; The water supply should be sufficient, and the amount of water used for washing vegetables, dishes, etc., should be calculated well on the water supply pipe, otherwise it will be very troublesome if there is not enough water when cooking; There is also drainage, preferably with automatic drains, as a kitchen if more than 50 people are cooking, a large amount of sewage needs to be discharged in terms of cleaning.
If it's not an enclosed balcony, there's no need to install one, and if it's a closed balcony separated from the room, it's better to install one.
According to Article 1 of the Notice of the State Administration of Taxation on Further Clarifying Issues Concerning the Calculation and Levy of Real Estate Tax on Housing Ancillary Equipment and Supporting Facilities (GSF 2005 No. 173), in order to maintain and increase the use function of the house or make the house meet the design requirements, all the ancillary equipment and supporting facilities that cannot be moved at will, such as water supply and drainage, heating, fire protection, central air conditioning, electrical and intelligent building equipment, etc., should be included in the original value of the real estate regardless of whether they are separately booked and accounted for in the accounting, the property tax is levied. Therefore, the central air conditioning configured in the company's factory building, which is based on the house and cannot be moved at will, is a supporting facility that should be subject to real estate tax and should be included in the original value of the property for real estate tax.
Emergency lighting is not set on the ceiling, it should be set on the wall.