How to remove the lights from the integrated ceiling in the kitchen, and it can t be pryed

Go out and buy one of those little suction cups that suck on the tiles and hang things, come back and suck up the panel of the lamp and pull it down hard. Pull down the panel, you can see the lights inside, in fact, the LED bath bomb is placed on the ceiling keel, there are about four clips stuck on the keel, break the card, the bath bomb can be free. >>>More

If you want to install a suspended ceiling at home, you need to understand the steps and processes. How to dismantle the integrated ceiling? PChouse will take you to find out. >>>More

Use a flat-mouthed awl, insert it into the interface (the corner position of a board), and then pry it down slightly to open, because the 4 corners of the plate are concave, just to facilitate disassembly and assembly. Some plates are not thick enough and are easy to pull and deform, so after prying open a corner, pull down along a position, don't let the plate L-shaped force be stressed, and then gently pry open the opposite corner after pulling away 2 feet. If it is covered by the warranty, you can ask the person who installed it to get it for you.

If it is an embedded integrated lamp with the same specifications as the ceiling, it can be removed with a special suction cup or straightened with a paper clip, and it can be plugged into a pry from the crack of the plate, this kind of lamp is very thin, if it is a lamp installed separately, there is a change cone to gently pry the cover plate seam, and the lampshade can be removed.

Integrated ceiling is now used more of a kind, it can be said that it has a very unique advantage of the noisy family, deeply liked by people, and its color is more, can be matched according to the style of the home. The following will introduce to you how to disassemble the liquid family without suction cups in the integrated ceiling. >>>More