The network cable in the living room is the main network cable, and a router is installed in the liv

Updated on Living room 2024-07-07
4 answers
  1. Anonymous users2024-01-24

    You buy a new wireless router.

    Then go to the new router, disable DHCP, turn on wirelessly, set password, password and SSID as the best and living room to make the phone automatically switch to the convenient point.

    The network cable in the bedroom is connected to the LAN port and routed.

  2. Anonymous users2024-01-23

    Buy a portable wireless router and turn the bedroom LAN into a wireless WLAN.

  3. Anonymous users2024-01-22

    If the living room and bedroom are on the first floor, and the house shielding is not very good, just install a wireless router, try not to route the route.

  4. Anonymous users2024-01-21

    Connect the wireless router to the living room router The incoming line of the wireless router should not be plugged into the WAN or anything else. Go to the wireless router settings and turn off DHCP. You can get online.

Related questions
The bedroom is equipped with a network cable, how can I make the TV in the living room also use cabl
2 answers2024-07-07

You can try it like this, buy an unlimited router and an AP, and let the seller set it up for you when you buy it, the AP should be wirelessly bridged to the wireless router, so that you can take it home and use the router in the bedroom, and the AP is placed next to the TV, so that the AP can receive the wireless signal of the wireless router and convert it into a wired network so that it can be used. But this problem: 1, if the wireless signal is not good, it will be stuck when watching TV, and 2. There should be an outlet near the TV in the living room to plug in the AP

A network cable in the living room and a network cable in the bedroom, now only use the living room,
1 answers2024-07-07

If a network cable is divided into two ends, one end is connected to the router in the living room, and the other end is connected to the IP TV. >>>More

I want to change the network cable to the living room, the current network cable is connected to the
1 answers2024-07-07

There is no problem with the reserved network cable, and if there is no bridge, you can use the power modem or wireless router to bridge it, and you don't need to drill the wire.

The network cable in the living room can not be connected to the Internet, the network cable in the
1 answers2024-07-07

If it is the same route, confirm that the network cable is OK and look at the port of the router. Usually don't pick up the first one.

The network cable in the living room can be used, but the network cable interface in the bedroom doe
2 answers2024-07-07

This should be a problem with the integrated wiring of the network cable in the bedroom, you can first disassemble the panel, check whether there is a problem with the line made by the information module at the other end of the bedroom, and then use the line tester to see if the integrated wiring is disconnected in the middle, and you can only go outside to ask someone to do it, and confirm that the wiring in the middle is disconnected, you can only find another way, such as using a power cat or wireless way to solve it.