-
Anonymous users2024-01-23This should be a problem with the integrated wiring of the network cable in the bedroom, you can first disassemble the panel, check whether there is a problem with the line made by the information module at the other end of the bedroom, and then use the line tester to see if the integrated wiring is disconnected in the middle, and you can only go outside to ask someone to do it, and confirm that the wiring in the middle is disconnected, you can only find another way, such as using a power cat or wireless way to solve it.
-
Anonymous users2024-01-22Find a professional to help you check whether the bedroom network cable is connected properly and whether there is a problem.
No, you can't
Either use a wireless router, but the signal may not be good in the bedroom; Either just connect the network cable and come out, it may be ugly. >>>More
It may be that the fixed IP settings of your 2 routers are conflicting. >>>More
Are you sure that the line is connected when you decorate, and where is the line connected, it doesn't work, you have to have these tools, line finder, line tester, network cable pliers, crystal head, why is it so troublesome for you to get, because sometimes this can be used! It is recommended to repair, sometimes the line is not done well when decorating, this is simple, remove the wall box to see the line sequence is wrong, take a slotted screwdriver directly to the card on the line, if you don't know anything and don't want to get it, just pull a bright line over the line.
I also want to know, I used to pretend to be iQiyi, Youku, but now the state regulations don't show it.
It depends on how the network was designed when you renovated it, and whether there was acceptance after the renovation was completed. It could be a problem with the network structure, or it could be a wiring problem.