-
Anonymous users2024-01-241.According to the regulations, if the bathroom has a shower area, the waterproof height of the wall should be meters high.
2.Next door to you is a bedroom and there is a wardrobe, it is best to do the top grid, which can prevent splash water from seeping into the wall, causing the wall to re-moisture and causing the deformation of the cabinet, and the other three walls should also be meters high, and it will not cost much money, and it is more assured.
-
Anonymous users2024-01-23Yes, you can do it on the same wall as you use for bathing.
-
Anonymous users2024-01-221. The base layer is cleaned and smooth, solid and free of floating dust, and the details of the nodes are strengthened; 2. Take an appropriate amount of primer and infiltrate about 50% of the water into the primer, stir well and apply a layer; 3. The first coating: after the bottom coat is dry (about 2 hours), the first coat is scraped and the amount is scraped; 4. The second coating: after 6-8 hours (the surface is not sticky and the coating has a certain strength), apply the second coating, and the scraping direction is perpendicular to the first coating; 5. Make waterproofing from the ground to the wall not less than 300mm high, and the bathroom wall not less than 1800mm high.
Calculated by area; 6. The temperature should be higher than 5 degrees during construction, and it is not suitable for construction on rainy days or when there is open water at the base level.
-
Anonymous users2024-01-21As long as it is a bathroom, it should be all done 1.8 meters. Although you have to do this as a bathroom, you have to do it if it has the function of taking a bath.
First of all, the 24-hour water avoidance test, that is, the kitchen and bathroom are waterproof before not tiling, and after completion, block the floor drain, release water, place it for 24 hours, and go downstairs to see if it leaks. And secondly, it looks like you're using rigid waterproofing, and it looks like cement, and it's a little bit darker than it. Now the universal flexible waterproof like Sika, Oriental Yuhong, made out of a layer of adhesive film, very good. >>>More
After the waterproof and closed water are qualified, it is generally handed over by the owner to the bricklayer to be cleaned and then tiled.
It is a human thing, how much will be unsatisfactory, and whether the water leaks in the later stage depends on your actual use and how to maintain it in the later stage.
1. The waterproof part should be comprehensive;
Second, the construction of the waterproof layer should be painted in strict accordance with the product instructions and brushed enough to a certain thickness >>>More
A drainage system that separates domestic sewage from domestic wastewater should be used in the following situations in the building: >>>More