win7 imitation win8 1 task anti theft door handle loosened, how to change the shrapnel inside

What you are talking about should be a small handle on the top of the outer handle is loose, and there are two situations of maintenance: first: ordinary dead handle, tools are needed, screwdrivers (clubs and slots) vises, adjustable wrenches, small hammers.

First of all, remove the handle, the first step is to see a coin-sized screw cap to remove it, there is a spacer below to remove it at the same time, the second step is to knock the spacer flat with a small hammer, and at the same time knock the handle to the position of the gasket flat (the purpose is to make the gasket and the handle paste seamlessly) and finally tighten the screw OK (pay attention to whether to open the door or the right door, do not reverse the direction of the handle when you go up. Second: It is recommended to ask the manufacturer to repair:

Handles with quick locks (i.e., movable handles that lock the door as soon as the handle is lifted when you go out) require tools Torx and a flathead screwdriver. Small hammer. Step 1:

When taking it off, pay attention to the inner and outer handles with springs and latches inside, you are easy to fall into the door, second: you can see that there is a "clip" at the junction of the handle and the handle, and there is a gasket under it to observe the degree of wear between the clamp and the gasket and the handle, and how big the gap is. Use a flathead screwdriver to peel off the clip, and finally use a small hammer to crack the gap in the handle a little bit, or add a spacer.