-
Anonymous users2024-01-24Whether it is an aluminum buckle plate or a plastic buckle plate, the two disassembly methods are different, and the aluminum buckle can be removed by plugging it into the seam with a blade and turning it down. Inside is the main body of the bath bomb, which is generally grasped on the two liners through the claw buckles of the four corners, and can be removed as a whole by pushing it up. The plastic gusset is generally attached to the wooden strip inside with screws.
It is also to fold the outer cover first, and then remove the bath bomb.
-
Anonymous users2024-01-23It is stuck on the ceiling, and it is warped on the edge of the lamp with a flat taper, and then it is pulled down by hand. Note that some wiring is short, which can easily tear the wire.
If you know it yourself, you can change the exhaust fan alone.
9.Waterproof treatment: Because water can be seen everywhere in the bathroom, it is necessary to do a good job in waterproofing to prevent the downstairs neighbors and themselves from causing trouble due to water seepage, so it is necessary to do a closed water test after waterproofing to ensure the waterproof effect. >>>More
The problem of the switch. This thing doesn't need a driver or something, so if you can't turn it off, just look for a switch.
The Opple hot air ventilator I just bought also smells of burnt plastic. It is extremely harmful to human health!
The new guy has a bit of a plastic smell, or the hot wind blows out, and after a while, it's okay to see if there is no smoke and the lamp is not black.