-
Many people have this problem, in fact, they can only deal with it in their own home, that is, your family did not do sound insulation treatment when you contracted the water pipe before. The solution now is to change the pillars.
-
The suggestion is soundproofing. This has to do with the fact that the drain is not sound-dampening.
-
If there is a ticking sound in the bathroom, it should be that there are some small debris such as hair accumulated in the sewer pipe upstairs, and the water drip down the small debris into the pipe, and the sound will occur; There is also a possibility that the sewer pipe does not have the process of thermal insulation and sound insulation cotton.
-
The toilet on the top floor of your house upstairs 3 - continues to leak, just see who repairs it.
It should be that the sound insulation is not good, and there is a sound when there is water flowing down or dripping in the water pipe, which is not easy to do! It's better if it's leaking!
It can only be treated with PVC glue.
In most cases, you need to replace pipe fittings and local pipes, you still don't know very clearly, because whether the leakage location is convenient for maintenance and whether the pipe fittings can be replaced are influencing factors, to give you an idea, it is a last resort, in the case of indeed unable to achieve normal maintenance conditions, you can carefully deal with the surface of the leaking pipe, both sides of the interface should be treated, you need to throttle for a short time, do not have water at the interface, after the treatment is clean, use a piece of PVC pipe sheet of the same material as the pipe, Use a special glue to glue to the interface and fix it with something. PVC has a special adhesive glue, which is made of the same material as the pipe, as long as you clean the surface of the pipe and apply the glue evenly, you will be able to stop the water leakage. >>>More
1. Redo waterproofing.
Redoing waterproofing means re-laying the floor tiles, removing the original tiles and cleaning the base surface. After the cement mortar is proportioned, the ground is leveled and further waterproofed. The height of the waterproof wall is controlled at about 30cm, which is the main waterproof method. >>>More
Workaround:
The water pipe joint is loose, resulting in a water leak, and if it leaks in this way, then this is easy to do. The first thing to see is whether the plastic water pipe joint is broken, or can not be used, if it can be used, it can be tightened directly with equipment tools, if it has been produced cracks or broken, can not be used in the case, then it is best to buy a new installation. >>>More