Can you use a toilet shifter for underfloor heating at home?

Updated on Toilet 2024-07-31
4 answers
  1. Anonymous users2024-01-24

    Shifters need to be buried, but there are generally no heat pipes near the toilet drain pipe. Before installation. It is recommended that you consult the property first, verify that there is no pipe, and then open a slot to install it. Or you can raise the ground to install it.

  2. Anonymous users2024-01-23

    If you don't destroy the part below the ground, it's okay.

  3. Anonymous users2024-01-22

    The toilet shifter is placed above the ground and is not affected below the ground. Can be used.

  4. Anonymous users2024-01-21

    Bathrooms are generally not heated under the floor.

Related questions
2 answers2024-07-31

It still works.

Toilet shifter: Some are called offset, sewage shifter, which is mainly used in toilet installation. >>>More

2 answers2024-07-31

1. The use of toilet shifter is easy to cause toilet blockage, and after installing the shifter; As there are more curves, the air pressure increases, which can easily cause backflow. 2. In addition, after using the toilet shifter, the floor is raised accordingly, and the toilet is also raised. But in your case, you can only use a toilet shifter, but the shifter must be of good quality, otherwise it will be troublesome if there is a problem in the future. >>>More

3 answers2024-07-31

Be cautious about toilet shifting, the embarrassing situation that may result from toilet displacement is that the new toilet drain is often not smooth, dirty things can't flow out, and it smells from time to time. >>>More

1 answers2024-07-31

It's very easy to use. A dozen dollars. It's just that the displacement is not too far, only about twenty centimeters!

20 answers2024-07-31

Toilet shifter: also known as offset, drain shifter;It is mainly used for toilet installation, because the position of the toilet wall and the sewage outlet is fixed, and the selected toilet sewage outlet and the lower sewage outlet do not correspond to the position of the pipe fittings used in the case of incomplete docking. >>>More