There is a router connected to the living room, and a desktop computer is connected to the bedroom

Updated on Living room 2024-07-14
2 answers
  1. Anonymous users2024-01-24

    First of all, whether you have a wired connection or a wireless connection, the wired connection is very simple, just change the IP address of the No. 2 router to a wireless connection, and you can't teach you to need a wireless bridging here.

  2. Anonymous users2024-01-23

    Is there only one device to go online? If you want to check whether the line is connected, whether the network card driver is normal... If you have wifi connection, mobile phone, ipad and other devices,,, set the IP address of the computer.

Related questions
2 answers2024-07-14

There is a problem with the network cable interface in your living room. The router does not need to be re-set at home to change locations.

2 answers2024-07-14

Put the secondary router in the bedroom, the cable out of the main router is connected to the LAN port of the secondary router, the LAN port IP of the secondary router is changed to the LAN port IP of the main router, the secondary router turns off DHCP (or turns on DHCP but the address pool does not cross with the DHCP of the main router) and sets the wifi name & password to be the same as the main router, and the computer wired Internet access can be connected to the LAN port of the secondary router.

1 answers2024-07-14

Both routers are wireless routers, so it's easy to do. You can use a wireless bridge to connect your living room router to the Internet. >>>More

2 answers2024-07-14

You can only watch analog signals without a set-top box, and it is okay to use the same set-top box for two TVs, but two TVs can only watch the same station and cannot watch each other. If you have a computer at home and the TV can't be connected to the network cable, then buy a router. Then buy a network set-top box, and you can watch a lot of wireless signals.

11 answers2024-07-14

If you want to use wireless Internet access, you have the wrong connection, you should have a wired LAN connected to the wireless WAN, the wireless WAN is set to dynamic, and the LAN setting is not the same IP as the wired.