-
Anonymous users2024-01-24It is because the valve after opening, after you use it once, it is not reset in time, resulting in the valve is not closed tightly and leaks, and it is more troublesome to adjust it by hand, and it is necessary to adjust it after each use. It is also possible to change the part that controls the valve because it is no longer functional.
-
Anonymous users2024-01-23If you can't find someone to help you fix it for a while, you turn off the valve into the urinal, so that there is no water in the tank, and then open it when you use it, it is best to find someone to repair it as soon as possible, after all, waste is not cost-effective.
-
Anonymous users2024-01-22Oh, that's easy.
It's OK to buy a new set of sanitary ware (that is, a flushing device) and replace it, which is very cheap, between 7 and 10 yuan.
Plumbing is available everywhere.
-
Anonymous users2024-01-21The plug or piston in the water outlet at the bottom of the box has aged or is broken, just replace it.
-
Anonymous users2024-01-20It is advisable to change the valve.
-
Anonymous users2024-01-19Quickly find the management office to save water.
-
Anonymous users2024-01-18Close the valve of the water inlet pipe and find the property to fix it.
-
Anonymous users2024-01-17There's a problem with the purine or the connecting rod is blocking it.
Maybe there is a problem with the adjustment in the tank, find someone who understands to check it.
It is possible that the water sealing beat of the drain valve is stuck, and it will naturally keep ringing because the water is not reset, so the button cannot be pressed.
There should be adjustable screws inside. If it cannot be found, or if the adjustment is ineffective, the entire component must be replaced. Because different brands have different structures, rough photos can't be studied in detail, so if you can't solve the problem, you can find a plumber and ask him to help adjust or replace the parts.
There are many models of accessories in the water tank, from the description, it should be a mechanical failure, from the language can not know which one, it is best to have a picture or a finger, you will know how to repair,
Buy the same set, then close the water inlet angle valve first, use a wrench to remove the water pipe, loosen the fixing nut of the water tank inlet valve, you can remove the bad valve, and then put the new water inlet valve in, tighten the fixing nut on it, and then install the water inlet hose, open the angle valve to test the leak, if it does not leak then OK.