-
Anonymous users2024-01-24Toilet cleaner, pour it into the toilet, flush it after ten minutes, and brush it with a brush at the same time, the general stains can still be removed.
-
Anonymous users2024-01-23There is a special toilet cleaner available in supermarkets. Buy rust remover in the supermarket with vinegar and water, pour it into a container with scale, let it stand for a few seconds, and then clean the inside with a brush to remove the scale tiles and floor joints on all sides of the bathroom. At this point, it can be removed with smokeless hydrochloric acid.
Spray smokeless hydrochloric acid on the wall, joints and floor, after one minute, it can penetrate into the cement surface, begin to bubble, separate the wall cancer and cement, and then brush it with a brush for a while, rinse it with water, it can completely remove the scale and wall cancer on the tile, and the tile can also restore its luster as new. Smokeless hydrochloric acid is generally available in supermarkets, and a 500-gram can (slightly more than an aluminum can of Coke) is about NT$6 to 10, which is very cheap. Anthracite hydrochloric acid is corrosive, avoid direct contact with the skin when spraying and brushing, empty cans should be immediately locked and discarded, if not used, should be locked and placed in a place out of reach of children.
In case it gets stinging on the skin, rinse immediately with plenty of water to avoid damage and avoid getting it to your eyes.
-
Anonymous users2024-01-221. First sprinkle some baking soda in the toilet bowl and let it stand for 10 minutes, so that the dirt in the toilet bowl can be better removed.
2. Make detergent. Pour salt, dish soap and laundry detergent into a container and stir with water.
3. Pour the prepared detergent into the watering can.
After minutes, spray the detergent on the dirt in the toilet.
5. Then scrub the toilet bowl with a brush.
6. Finally, press the flush button, so that the toilet is cleaned, and ask the unit how to deal with the squatting pit full of rust.
-
Anonymous users2024-01-21With Mr. Mighty Will.
You can use white vinegar to soak it in it, and then wash it, and it's good.
1. How to remove the rust and yellowing of the toilet.
1. Pour the mixture of white vinegar and baking soda into the toilet, wait for a quarter of an hour, and then rinse with water to clean it. 2. Using leftover cola can also effectively disintegrate yellow scale and achieve the effect of cleaning. 3. Collect the cigarette ash that you usually smoke and apply it to the yellow scale, or wipe it off. >>>More
What about toilet powder I bought in the supermarket, it was a white powder, and I sold it at school, and it was very useful. It is blue plastic. There was yellow stuff in the bedroom before, and as soon as I sprinkled it, I waited for a while, and it was very clean. Now I use the Jinbao brand.
Porcelain pools are used for a long time, leaving behind brown rust stains that wash down the pipes. If you want to get rid of it, it's not very easy, but it's not so helpless, you should prepare salt and vinegar, mix salt and vinegar together, stir, let the salt be fully diluted in vinegar, and then heat, after heating, use an absorbent sponge or rag to dip the liquid to saturate, and then put it in a rusty place, cover for 20-30 minutes. Half an hour has passed, and it is easy to remove stubborn rust by using a rough cloth dipped in a mixture of salt and vinegar and scrubbing vigorously.
It can be solved by installing a special scale preventer on the inlet pipe of the toilet tank to remove scale, and the effect of removing scale is more significant if a smart heating toilet is installed.