What is the cause of peeling on the surface of the tile in the bathroom?

It means that the waterproofing of the bathroom is not done well, and the water seeps into the outside and resurgence.

The biggest reason is that the waterproofing is not done well, and the moisture returns.

If the bathroom is leaking from the waterproof layer, rather than the upper and lower water pipes, it can be repaired without smashing the ground. The maintenance method is very simple, that is, use a new type of penetrating waterproofing agent to waterproof the surface of the bathroom again, so that the water does not enter the ground and flows directly from the waterway. 2. If it is a problem with the upper and lower water pipes, and the water pipes are underground, you need to consider smashing the floor, but it is not necessary to redecorate the bathroom. >>>More

First of all, you need to know what causes it, and then you can prescribe the right medicine. Possible reasons: 1. Caused by the resurgence of the weather, it is inevitable that it is the rainy season; 2. If the water pipe is leaking, turn off the water valve and see if the water meter can go.

There are many reasons for water seepage on the bathroom wall, and the new waterproof layer is ineffective or the water pipe leaks will cause water seepage on the wall. When you are not sure about the cause, you can first test whether it is a problem with the water pipe, and the test method is relatively simple: turn off all the faucets and see if the water meter is moving. >>>More