-
Anonymous users2024-01-23The biggest reason is that the waterproofing is not done well, and the moisture returns.
-
Anonymous users2024-01-22It is best to make the bathroom waterproof and then fully glued tiles.
-
Anonymous users2024-01-21It is because of the dampness so the skin is peeled, and the general treatment method for the dampness of the latex paint wall is:
1.Remove a slightly larger area of the original wall surface until the plain ash is exposed (that is, remove all the white and latex paint layers);
2.Wait for the wall to dry and re-scrape the white, apply latex paint (if it is caused by the moisture of the inner wall of the bathroom, it is recommended to do waterproof treatment first);
3.During the construction process, it is necessary to ensure that each process is thoroughly dried before proceeding to the next construction.
The causes of the water leak are as follows:
1. The reason for the leakage of the sewer pipe - the use of galvanized pipes is too long, such pipes are generally prone to water leakage in more than ten years, and they are usually rotten from the inner layer to the outer layer, and the rotten area we can break it only by hand. Generally, water leakage causes a large area of watermarks and even dripping water on the top floor slab of the lower floor. Users who use galvanized pipes are basically blocked by limescale in the dismantled old pipes, resulting in very small water pressure at home. >>>More
There are two cases of water leakage in the bathroom, one. >>>More
Analysis of the causes of water leakage in the bathroom wall: >>>More
1. Waterproof layer leakage: If there is no doubt about the water inlet pipe and drainage pipe, let's close the sluice, drain the water in the water pipe, and do the closed water experiment upstairs for 24-48 to see if there will be water leakage downstairs. The leakage of the waterproof layer is a more troublesome water leakage problem than the spine Zhaoming, and it is necessary to knock off the floor tiles upstairs to make waterproofing from scratch. >>>More
1. Water seepage on the wall caused by pipeline leakage. Water seepage on the wall caused by leaking pipes is a relatively common cause. You can look at the construction drawings and check the direction of the water pipes at home. >>>More