What do you need to pay attention to when installing a toilet

1. Toilet acceptance criteria.

1] Open the angle valve and check whether there is leakage at the connecting port.

2] Check whether the opening and closing of the automatic valve in the box is flexible.

3] Check the distance between the water level height and the overflow pipe after the water is filled.

4] Press both sides of the toilet with both hands and shake it slightly vigorously to see if it is stable.

5] Put the toilet paper in a ball, open the water hole of the board for flushing observation, and check whether there is leakage in each interface.

6] Continuous flushing and discharge shall not be less than three times, if the discharge is smooth, and there is no leakage at each interface, it is qualified.

Second, the toilet acceptance precautions.

Before choosing a toilet, you should first determine the size of the toilet drain, and the distance between the drain and the wall is standard in millimeters.

According to the size, you can choose your favorite toilet style, generally choose water-saving type (3-6L), and you should see the model and origin clearly when purchasing.

Before installing the toilet, make sure that the accessories and instructions are complete, and carefully read the instructions to prevent stealing beams and changing columns and cutting corners.

1. Installation begins after receiving and accepting in person.

Toilets should go through strict quality inspection before leaving the factory, such as water testing, visual inspection of appearance, etc., and the products that can be sold on the market are generally qualified, but Jiuzheng Home Network reminds that no matter how big the brand, it is also necessary to open the box and inspect the goods in front of the merchant to check whether there are obvious defects and bruises, and whether there is color difference in each part.

Second, pay attention to adjusting the ground level.

After buying a toilet with the same wall spacing size and sealing cushion, you can start the installation. Before the installation of the toilet, a comprehensive inspection of the sewage pipe should be carried out to see whether there is mud, sand, waste paper and other debris in the pipeline, and at the same time check whether the ground of the toilet installation position is horizontal. Cut the drain short, and if possible, make the drain 2mm-5mm above the ground.

3. Check whether there is leakage after debugging and installing the water tank accessories.

Check the water pipes first, drain the water for 3-5 minutes to rinse the pipes to ensure the cleanliness of the water pipes; Then install the angle valve and the connecting hose, and then connect the hose with the installed water tank accessories inlet valve and connect the water source, Jiuzheng Home Network recommends checking whether the water inlet valve and sealing are normal, whether the installation position of the drain valve is flexible, whether there is any jamming and leakage, and whether there is leakage to install the water inlet valve filtration device.

Finally, test the sewage effect of the toilet, the method is to install the accessories in the water tank, fill it with water, try the flushing of the toilet, if the water vortex is very rapid and flush quickly, it means that the water is unobstructed, on the contrary, to check whether there is a blockage.

1. Before installing the toilet, it is necessary to make calculations and various accurate measurements to ensure that the toilet is installed correctly.

2. To check the sewage pipe of the toilet bowl to see if there is a blockage in the pipe, you also need to check the levelness of the ground. The sewer pipe also needs to be shortened, but it needs to be at least two centimeters higher than the wall.

3. In the process of installation, the bottom surface of the toilet needs to be covered with glass glue during the fixing process. However, it is necessary to control the size of the gap between the toilet and the wall, and the toilet products need to be aligned.

4. After installation, it is also necessary to see whether the toilet flushes smoothly and whether the switch is normal.

5. After installing the toilet, you need to check the water pipe and flush it for a few minutes to allow the pipe to be flushed.

6. After installation, connect the water pipe. Then check the tightness, whether the toilet is in normal use, and whether the drainage pipe is smooth. For household water pipes, the water pressure is generally very stable, and the toilet tank is filled with water.

Press the flush switch of the toilet bowl to see if the toilet drains smoothly and whether the drainage performance is good. If the water flow is relatively fast, it means that the drainage is very smooth, if the water is not in the water for a long time, you need to see if the pipe is blocked.

This does not affect emissions.

Question: Can you install a siphon toilet (squatting toilet has a water trap).