-
Anonymous users2024-01-24Hello; The leakage protector can not be used as a master switch, should use an air switch, because the air opening is to prevent short circuit and overcurrent and the line and electrical appliances burn out device, the leakage protector should be installed on the socket line, lighting generally does not need a leakage protector, generally threatens personal safety is the socket, I hope it can help you and hope you click to adopt.
-
Anonymous users2024-01-23As long as the leakage switch is normal, it will jump.
Turn off the kitchen lighting and socket first, unplug the electrical appliances, and observe the power transmission.
It really needs to be seen in detail, it is likely that there will be a mistake when the thread is buried, and you can find me if you are in Tangshan.
After the mains is connected, the air conditioner should be connected to the user's main line, which is the socket line at the next level than the main line, and the lighting electricity consumption is the smallest, and the most basic wire can be used.
Brother, if the original two wires (one red and one black) are just the switch wires that control the light, theoretically they can't be connected to the socket. Because there is no neutral line in those two wires, one is the live wire, and the other is the control line to go to the light. >>>More
The lighting circuit should be separated from the socket to avoid any problems anywhere and the power will run out, because the socket is more likely to have problems than the lighting.