-
Anonymous users2024-01-23Turn off the kitchen lighting and socket first, unplug the electrical appliances, and observe the power transmission.
-
Anonymous users2024-01-22For you this question. Look at the wire diameter has a direct relationship. There is a direct relationship between the power of electrical appliances and electrical appliances. Hope it helps.
-
Anonymous users2024-01-21This may be a short circuit caused by the peeling of the wire when the switch is plugged into the wire. There is also the quality of the equipment itself.
Brother, if the original two wires (one red and one black) are just the switch wires that control the light, theoretically they can't be connected to the socket. Because there is no neutral line in those two wires, one is the live wire, and the other is the control line to go to the light. >>>More
The square wire is enough for a single wire, and the ordinary socket is bought with 5 holes and 10A. Directly to the shunt switch, (L to the live wire, N to the zero wire, and one is the grounding wire) 3 one way, the air conditioning socket is 16A. The mechanical and electrical wiring of the large cabinet should be replaced with a thickness of more than 4 square meters. >>>More
According to national regulations, it is not a circuit, if it is after decoration, it should be checked whether it has been changed to a road.
The kitchen and bathroom are damp, so the switch and socket should be kept away from the water source, and now the smart toilet is fashionable, so there should be a socket next to the toilet, and if you want to install an electric water heater, you should also set up a socket at the location of the electric water heater.
1.The kitchen countertop socket should be about 1300mm away from the ground, and the average family will choose to install 4 sockets. >>>More