The floor area of the house is 92, the area of the suite is 82, except for the bathroom, the kitchen

How to calculate the area of the floor to eliminate waste.

1. Solid wood flooring (specifications: 900mm 90mm 18mm, 750mm 90mm 18mm, 600mm 90mm 18mm):

Room Length Floor Length) (Room Width Floor Width) = Number of floor tiles used.

Take a room with a length of 10m and a width of 8m, and use a 750mm 90mm and 18mm floor as an example

The room is 10m blocks long).

The room is 8m blocks wide).

Number of wood floors to be purchased: 14 90 = 1260.

When purchasing, it is necessary to take into account that there is usually 8% loss in the paving of solid wood flooring.

Rough calculation:

Room floor area Area per floor Number of floor tiles used.

2. Floor tiles: accurate calculation method:

Room length (brick length) (room width brick width) = number of bricks used.

The room is 10 m long and 8 m wide, and the 400mm 400mm is used

Take the specifications of floor tiles as an example:

10m block.

8m blocks. 25 20 = 500 bricks in total.

When purchasing, an additional loss of about 3%-5% is required.

Rough calculation:

Room floor area Area of each floor tile (1+10%) = number of bricks used (where 10% refers to the increased loss).

3. Laminate flooring (common specifications: :

Precise calculation method:

Room length (board length) (room width board width) = number of floor plates.

Take a room 10m long and 8m wide as an example:

The room is 10m blocks long).

The room is 8m blocks wide).

Total number of plates: 10 42 = 420.

Laminate flooring often has a loss of 3%-5% in paving, if calculated by area, do not ignore this part of the amount.

Rough calculation:

Room floor area (number of floor plates.

In fact, you don't need to calculate anything, if you just want to know how much money you want, you can just calculate 82-15.

The flooring shop will measure it by itself, because it will be more troublesome to have more inventory. Generally, the loss of the floor is within 3-5%, and the standard is within 5%, but it is related to the sleeve type, curved, and there are many corners and corners, which will waste a lot. It depends on the master's craftsmanship 8 pieces and 12 pieces The gap is often gray and gray Who has used it knows.

According to the normal situation on my side, you should have 60-65 again.

The answers upstairs are all. It's so complicated. It's very simple for us to measure the house.

Almost all of them are long and wide. Of course, there are other special measurements. It's hard to say this.

Because of the walls of the house. I don't know how the shape was designed. It's hard to draw conclusions.

There's also a doorway stone or something. It's best to find a professional measure. Linyi's words M I.

Heh, don't you forget about such a problem?

The area of the set - 15 square meters and then multiply it.

It's about 60 to 65 square meters.

The flooring dealer installs it free of charge, and the flooring dealer will give you flooring and rings according to the size of the house. All you have to do is pay.

It's about the same size as my house, and 60 square should be about the same!!