Is a gas water heater safe for bathing in the kitchen and bathroom?

Updated on Kitchen 2024-07-10
4 answers
  1. Anonymous users2024-01-24

    Is the bathroom and kitchen separated? If yes, then safe. If not, the kitchen has no windows, and you don't have to worry about opening them. If there are no windows, it is barely safe, and you need to be careful not to leak the water heater.

  2. Anonymous users2024-01-23

    Nowadays, gas water heaters are all strong exhaust type, and the exhaust gas produced by combustion is discharged to the outside, and it is safe to take a bath in the bathroom.

  3. Anonymous users2024-01-22

    Safety, only balanced gas water heaters and other non-gas water heaters can be installed in the bathroom.

  4. Anonymous users2024-01-21

    The installation specification of gas water heater is that it should be installed in the kitchen or balcony, and if it is installed in the bathroom, the water heater must be in the form of strong exhaust and have smoke exhaust measures. Most unsafe water heaters are installed in the bathroom and do not exhaust smoke.

Related questions
2 answers2024-07-10

Safe, but you need to buy a gas water heater with a strong discharge or balanced type. The exhaust gas generated is discharged outdoors with the smoke exhaust pipe.

3 answers2024-07-10

First of all, you check whether there is an angle valve under the cold water pipe under the washbasin and kitchen basin is fully opened, such as the plate is fully opened, and then check whether there is a filter screen at the right mouth of the faucet, disassemble it to see if there is a blockage, if there is no blockage, whether the amount of water is small in the case of completely cold water, if the amount of water is small, it is a problem of tap water pressure, and the possibility of general water pipe blockage is not large. If the water flow is very large in the case of completely cold water after the above inspection, but the hot water is small, it may be related to your water heater settings, and you need to find after-sales service to check the water heater pressure valve and pressure sensing components.

3 answers2024-07-10

A hole needs to be drilled in the partition wall, and a T-shaped diverter can be added to the outlet pipe, and the specific steps are as follows: (1) install a T-shaped diverter head at a suitable position of the hot water outlet pipe, and (2) connect the water outlet of the gas water heater and water heater at the upper end. >>>More

1 answers2024-07-10

It is related to water pressure, it is easy to start far away, the plastic film inside the gas water heater is broken, I used to use the Chigo water heater every other year, this phenomenon will appear, I have to call someone to change it once, it costs dozens of yuan, and the cost is less than a dime. . . Caused by high water temperature.

2 answers2024-07-10

Check the hot water line leading to the bathroom and remove the blockage and it will be solved.