-
Anonymous users2024-01-24Is it feasible for the toilet on the second floor to merge sewage into the toilet sewer on the first floor through a 6-meter horizontal pipe? There will be no poor drainage.
Is it feasible for the toilet on the second floor to be incorporated into the sewerage pipe on the first floor of the forest through a 6-meter horizontal pipe? Will there be poor drainage, and the toilet on the second floor will be directly connected to the sewage pipe? I think the toilet on the second floor is not directly connected to the sewage pipe, in fact, although the toilet is a place to pee, it is necessary to pay attention to hygiene, in fact, the toilet must be clean, to use good water, can not use polluted water, so that the room stinks, I think that you can't connect the polluted water to flush the toilet, which is not good for the body.
-
Anonymous users2024-01-23Yes. But try not to use a 90-degree elbow, and the whole transverse pipe should have an inclination of more than 15 degrees. And the diameter of the pipe should be as large as possible.
-
Anonymous users2024-01-22First: the horizontal pipe should have a drop, at least 4cm.
Second: the diameter of the drain pipe should be 110.
Third: In your case, it will be better to flush the toilet directly.
-
Anonymous users2024-01-21Pay attention to the high and low, and do a good job of smoothing the water.
-
Anonymous users2024-01-20Not back. The problem is that the toilet bowl should be flushed in time.
Try to use bright and warm colors in the interior of the house, and the furniture should also be in light colors.
1. The toilet is of poor quality. 2. The toilet is unqualified. 3. The installation is not correct, the sewer is not aligned, or the sealing ring is not aligned, my toilet is a little off, blocked several times, and then reinstalled it.
Of course, it is necessary to make a girder, generally a girder with a height of 1 meter and 10 cm, and a girder of 50 cm at 5 meters. Absolutely necessary!
First copy
I think such a large area of thin plate with a little steel bar is not set up beam is very dangerous, such as to set up a solid brick wall is a very stupid thing, do not think that set a reverse beam can solve the load problem, the beam can not form an overall force with the plate, itself in the design idea is a tofu project. Secondly, if you have to add walls, it is recommended that you add beams under the slabs and add independent columns to the beams. Only in this way can the safety of the house structure be guaranteed. >>>More
If the property doesn't arrive, I don't know!