-
Circuit Poor contact or voltage instability or electric drill damage to wires, live wires. It needs to be repaired by a professional electrician, but it is more troublesome.
-
When punching, the current changes greatly, and the lamp may flash and flash, which is normal.
If the lights are usually flashing, check the wiring and bulbs.
-
Poor circuit contact or voltage instability, I have encountered it, and then it will be fine, if you are worried, find an electrician to overhaul it, it is not a big problem.
-
The circuit is in poor contact, find an electrician to take a look.
-
The electric drill injured the wires, the fire wires. It needs to be repaired by a professional electrician, but it is more troublesome.
If it's a perforated installation, you should buy an expansion screw! How deep the hole should be, there are expansion screws to see, but the deeper point does nothing, you have to put the expansion screws in! Well, at present, many can use non-porous dish washing shelves, which is still good, after installing tiles, use suction cups so that you can not nail and do not damage the wall! >>>More
1. The materials of towel racks are roughly the following materials: copper, stainless steel, zinc alloy and aluminum. Generally, the outer layer of copper, zinc alloy and aluminum towel rack should be electroplated, and the electroplating effect is good, and it is also very practical. >>>More
1. The towel rack is installed in a place where the hand is suitable for sleepiness and should be within reach; >>>More
1. The materials of towel racks are roughly the following materials: copper, stainless steel, zinc alloy and aluminum. Generally, the outer layer of copper, zinc alloy and aluminum towel rack should be electroplated, and the electroplating effect is good, and it is also very practical. >>>More
There are many options for shelves: glass, stainless steel, space aluminum. Bright colors of glass are a good choice. Towel racks are available in space aluminum and stainless steel, both of which are good.