-
If it is not convenient to do, then close the main valve, at least one day without water to try, if you suspect the next door, then ask him to close the valve at another time.
-
Whether the water supply pipe is leaking or not, you can do a pressure test to discharge the water supply pipe without leakage, and then find other reasons.
-
I am engaged in the decoration industry, and your water meter is moving around, and there is only one situation that is bad, thank you.
-
Let's do a suppression, it is estimated that the pipe is not welded well.
-
My family recently found that the water leakage is exactly the same as yours, and the leakage is not very large, have you found the cause? Seek help.
Use 995 structural adhesive to beat the gap first, and be sure to beat the gap carefully to see if it can be solved. No, you have to redo the waterproofing. >>>More
Many hotel toilets, bathtubs, basins, seafood pools, shower rooms, baseboards, and countertops always have annoying moldy edges, which not only affect the appearance, reduce the grade, but also affect hygiene. This is because these places are made of glass glue and the glass glue itself is suitable for organic matter, glass glue due to the moisture of the water, there will be a lot of mold and other microorganisms on the surface of the glass glue and between the crevices to grow, over time, the mold will be covered with the surface of the glass glue and turn black, at the same time, the mold will absorb more dirt and bacteria, so that the bathtub edge, the corner of the wall looks very dirty and disgusting, not only affect the appearance, but also feel unhygienic. It is also often complained by guests. >>>More
1. Check whether it is a flue or a sewer pipe. Whether there is a PVC pipe for solar hot water running in the wall. For details, please consult the developer or the property office. At the same time, check the renovation construction drawings of your home or consult the decoration company to see if there are any water pipes buried in the wall. >>>More
1. Redo waterproofing.
Redoing waterproofing means re-laying the floor tiles, removing the original tiles and cleaning the base surface. After the cement mortar is proportioned, the ground is leveled and further waterproofed. The height of the waterproof wall is controlled at about 30cm, which is the main waterproof method. >>>More
Experiment with cologne-fine seam glue. There must be no water during the drying process, otherwise it will not dry. After drying, it is completely transparent, and the thickness of 2 mm is fine.